Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Previous topic | Next topic 
Author Message
sempre
 Post subject: Terminal log
PostPosted: November 26th, 2008, 9:39 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1029
Hi to all!

Error is hdd ST9160821AS
Look:

Reset
4096k x 16 DRAM
VENUS - 1_Disk M-37 12-01-06_14:56

Buzz HM SFI
!
ERR Read Boot Adapts
:?:

Thanks advanced!!

_________________
Нет ничего невозможного
Top
 Profile  
 
pepe
 Post subject: Re: Terminal log
PostPosted: November 26th, 2008, 12:32 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
might be weak heads (most probably) or damaged adaptives...

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
rameez
 Post subject: Re: Terminal log
PostPosted: November 27th, 2008, 15:08 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
I vote for heads .
Top
 Profile  
 
networkpc3000
 Post subject: Re: Terminal log
PostPosted: November 27th, 2008, 22:42 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
hello,
have you try to swap the PCB?

_________________
data recovery service[/b]
Top
 Profile  
 
pepe
 Post subject: Re: Terminal log
PostPosted: November 28th, 2008, 3:31 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
yeah, one more chance: pcb is not the native one.

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
rameez
 Post subject: Re: Terminal log
PostPosted: November 28th, 2008, 14:05 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
I dont think it could be pcb issue if it was the output would have been about APP code .
Top
 Profile  
 
pepe
 Post subject: Re: Terminal log
PostPosted: November 28th, 2008, 16:42 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
If somebody messed up the PCBs and Sempre received it with non native PCB, the drive can seek the SA in a different position, so it cannot read boot adapts from there either...

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
sempre
 Post subject: Re: Terminal log
PostPosted: December 8th, 2008, 16:35 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1029
networkpc3000 wrote:
hello,
have you try to swap the PCB?



For exchange of pcb which details must be identical? (FW, MODEL,)
:mrgreen:

_________________
Нет ничего невозможного
Top
 Profile  
 
beto
 Post subject: Re: Terminal log
PostPosted: December 8th, 2008, 18:27 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1516
Location: Mexico
Check the numbers on pcb, and tried to find similar PCB Matching microcontroller and read channel, did u check if PCB its from patient HDA Sempre?
Top
 Profile  
 
sempre
 Post subject: Re: Terminal log
PostPosted: December 9th, 2008, 8:08 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1029
beto wrote:
Check the numbers on pcb, and tried to find similar PCB Matching microcontroller and read channel, did u check if PCB its from patient HDA Sempre?


Thanks my friend!!

I verify and post result in forum!! :mrgreen:

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: Terminal log
PostPosted: December 15th, 2008, 14:54 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1029
HEADS GOOD!
:mrgreen:

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: Terminal log
PostPosted: December 16th, 2008, 9:45 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1029
Hi to all!

in pci ver 2.21 and 2.27 not and compatible with model ? (ST9160821AS VENUS)
:!:
:shock:

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: Terminal log
PostPosted: December 17th, 2008, 13:11 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1029
sempre wrote:
Hi to all!

in pci ver 2.21 and 2.27 not and compatible with model ? (ST9160821AS VENUS)
:!:
:shock:



It has some possibility to use a utilitarian one of one another model to read the FW? :?:
:idea:
:mrgreen:

_________________
Нет ничего невозможного
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 134 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group