View topic - How can I use mhdd repair my hardhisk!

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

How can I use mhdd repair my hardhisk!

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

Archive_Simjoe

Post subject:

Posted: July 21st, 2003, 22:11

Joined: July 21st, 2003, 21:59
Posts: 17
Location: 中国江苏省南京市&

Hi! I think mhdd is very very good software, but I don't know how to use it repair my harddisk. These harddisk have some bad track, When I use mhdd F4 function key to scan my harddisk, it's appear "!" ,"?" and "x" etc. Who can help me!

My English is very poor!

Thinaks a lot!

Top

Archive_jmuanes

Post subject:

Posted: July 28th, 2003, 11:38

Joined: August 17th, 2002, 7:29
Posts: 37
Location: Sertaozinho

Hi, well you can start with the erase command or aerase and then you can do the scan, remember this can demage the files on the hdd, after you perform this function and you goes to scan; if you see !!!!!! then you may have an eletronic problem and the most commun is PCB demage.

OBS: In the future it will be better for you; when you want some information to be more specific, like what is the hard disk and how the problem start and all the infos that you can be able to say.

Top

Archive_Simjoe

Post subject:

Posted: August 5th, 2003, 0:26

Joined: July 21st, 2003, 21:59
Posts: 17
Location: 中国江苏省南京市&

Hi jmuanes!
I'm sure many of these hardisk PCB is good, only some of them have a few bad track sectors. I have already use command of arease, Erase waits and scan, but these bad track sector is still on! Please help me!

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 83 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum