Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
Archive_MJA
 Post subject:
PostPosted: September 14th, 2003, 4:59 
Offline

Joined: August 3rd, 2003, 7:46
Posts: 6
Location: ECC
Hi all,
I need help with an Samsung SV2044D, that a PCB Voyager 8/9 Rev.08. The PCB lights LED D1 but no other
function can be seen. As, from same person received also an Seagate Disk that have some components burn't i suspect that some kind of power failure had take place in the machine.
Any info about the PCB, that also have a label over the big IC-SEC 004A SID9901 KB209, that shows MM100-40, appreciated. Regards MJA
Top
 Profile  
 
Archive_guru
 Post subject:
PostPosted: September 17th, 2003, 8:32 
Offline

Joined: September 17th, 2003, 5:34
Posts: 26
Location: uk
MJA wrote:
Hi all,
I need help with an Samsung SV2044D, that a PCB Voyager 8/9 Rev.08. The PCB lights LED D1 but no other
function can be seen. As, from same person received also an Seagate Disk that have some components burn't i suspect that some kind of power failure had take place in the machine.
Any info about the PCB, that also have a label over the big IC-SEC 004A SID9901 KB209, that shows MM100-40, appreciated. Regards MJA

nice to see that you have easy repairs :) You only need good PCB's

_________________
Bye
Top
 Profile  
 
Archive_MJA
 Post subject:
PostPosted: September 17th, 2003, 15:13 
Offline

Joined: August 3rd, 2003, 7:46
Posts: 6
Location: ECC
Thankx,
But if i don't got one, even if i cry loud?

Albano

:(
Top
 Profile  
 
Archive_MJA
 Post subject:
PostPosted: November 22nd, 2003, 9:55 
Offline

Joined: August 3rd, 2003, 7:46
Posts: 6
Location: ECC
:(
I was able to get a new board, from other new disk.
I can read OK , but only Cyl:0 till head 32, sector 22.
Then i got "can't read sector".
Did this be a firmware issue? The only difference
from one drive to the other was that the former was
version A and the new AA.
Please Help!
Albano
Top
 Profile  
 
Archive_guru
 Post subject:
PostPosted: November 25th, 2003, 12:23 
Offline

Joined: September 17th, 2003, 5:34
Posts: 26
Location: uk
MJA wrote:
:(
I was able to get a new board, from other new disk.
I can read OK , but only Cyl:0 till head 32, sector 22.
Then i got "can't read sector".
Did this be a firmware issue? The only difference
from one drive to the other was that the former was
version A and the new AA.
Please Help!
Albano

Hello

You probably didn't read any sectors from the drive ;o)

Is the PCB the correct FW level? Can you read the drives serial number? Best option is to swap the flash chip..but in this case it could be original flash that was corrupted ;O)

It's gotta be worth a try..... Always good to keep flash firmware images in case you cannot find the correct PCB ;OPP hint hint

good luck

_________________
Bye
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google Adsense [Bot], we3fan and 146 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group