_________________
Достали!!!!. Я тут мимо проходил и решил сказать чего-нибудь безумного.
1.Можете пойти к ремонтникам.
2.Я испытываю естественный скептицизм по поводу чистоты человеческих намерений
3. Дорогу осилит ТОЛЬКО идущий

Best cloning software is the one made by myself :teeth:

I think everyone here needs information but have none themself, it's a shame but thats life. What you know is worth money, it costs $$ to research yourself, why should I give away my secrets for free?

Maybe need a special forum, for people who know what they are doing and can understand firmware/software and mechanics? Even exchange of good information that can help both parties.

I've had enuff of "Ohhh can't fix my Maxtor, can't do this, don't understand that" Spoon feeding is not an option in this game. If you think your a data rec company then get LEARNING yourself.... Sorry but it gets up my X&^$&$89^(

just my humble opinion..

_________________
Bye

:D Just want to see how the "Others" try to learn.

Actualy exchange information works <both ways> :me: Unlike yourself. What info have you learned that you have not been told?

Maybe R2D2 can help you, after all he's princess L's "Only Hope"

_________________
Bye

well i think media tools professional is very good,
but have a problem its quite slow, i think its beacuse pio mode
its working, its very good when you have many bad sectors,
but i f you dont have many bad sectors try using diskpatch its faster
and using udma66 at least.
there is clonemax ( pc inspector ) didnt tried it so i dont know if its
good , maybee others did??

the fastest and best is hardware cloners but i dont have one myself

Regards
Arye S

How do I clone using Encase ??
Encase Enterprise or Encase Forensic ??
Wich one ??

Thanks

dont know about encase i dont use it currently

use media tolls professional for many badsectors

if you dont have many badsectors use diskpatch

you can PM me further if you need help

Arye S

I don't like MTL, because it hangs on hard drives that have bad sectors. It freezes the program and you have to restart it...

ok

so what program do you use?

what is the best for bad sectors?

Regards
Arye S

Thanks Arye S

I´ll try diskpatch.

Hello,

I think everybody who has something to do with data recovery has at least to try to make a cloning utility for himself using ATA commands.
This can help to get an idea of how things work on the cable and the board.
And U will have the best cloning utility as well
This was amongst the first lessons I took in the beginning.
Now I use many things, but when something is really BAD, I use this 3KB code I have written in assembly.
And I can fine-tune it every time to fit the actual needs.

regards,
pepe

I think you're right Pepe... I'll start to work on my own cloning utility because is a very good way to learn while making something useful.

pepe, u say that using AT command to clonning, but how is the command??