All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: ST3160212A spinning but not recognised in bios
PostPosted: April 12th, 2009, 19:31 
Offline

Joined: April 12th, 2009, 19:10
Posts: 5
Location: NEW JERSEY
My HD was working till yesterday. All of a sudden it died. Bios does not see it. I can hear it spinning.
Is there a way I can revive it to retrieve some data.? Like pcb swap or firmware repair?

Thanks for your help.

Tom


Top
 Profile  
 
 Post subject: Re: ST3160212A spinning but not recognised in bios
PostPosted: April 12th, 2009, 19:39 
Offline

Joined: April 12th, 2009, 19:10
Posts: 5
Location: NEW JERSEY
when i power On the computer i hear the drive spinning and a few clicks. then the drive access light goes OFF and no more clicks but drive continues to spin.


Top
 Profile  
 
 Post subject: Re: ST3160212A spinning but not recognised in bios
PostPosted: April 12th, 2009, 20:02 
Offline

Joined: April 12th, 2009, 19:10
Posts: 5
Location: NEW JERSEY
This drive is IDE. can you send schematic for that


Top
 Profile  
 
 Post subject: Re: ST3160212A spinning but not recognised in bios
PostPosted: April 12th, 2009, 20:53 
Offline

Joined: April 12th, 2009, 19:10
Posts: 5
Location: NEW JERSEY
can I connect the rx/tx and gnd to a com port directly without teh rs232c chip etc shown in the diagram?


Top
 Profile  
 
 Post subject: Re: ST3160212A spinning but not recognised in bios
PostPosted: April 13th, 2009, 3:50 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4334
Location: Hungary
voltage levels are different for the COM port and the drive's port.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: ST3160212A spinning but not recognised in bios
PostPosted: April 13th, 2009, 5:27 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7474
Location: ITALY
Aren't step by step instructions available on videos? Not for the adapter, for recovering the data...


Top
 Profile  
 
 Post subject: Re: ST3160212A spinning but not recognised in bios
PostPosted: April 13th, 2009, 19:09 
Offline

Joined: April 12th, 2009, 19:10
Posts: 5
Location: NEW JERSEY
where are those videos available? any link?

also, can i use the usb to ttl uart device instead of the serial? which program is to be used with it? hyperterminal??


Top
 Profile  
 
 Post subject: Re: ST3160212A spinning but not recognised in bios
PostPosted: April 14th, 2009, 1:49 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7474
Location: ITALY
Just don't ask spoon feeding. Timeout for me.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 52 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group