Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 23rd, 2009, 6:02
i have Seagate Barracuda ST3500418AS
Site code Wu
It not Appear in Bios.
Did any one know How to Change Circuit to make HDD Working.
Here is the Harddisk DATa
Date Code 09345
Site Code WU (CHina)
the label on Circuit is 2364 F
I replace with
Date Code 09345
Site Code Wu (CHina)
but label on Curcuit is 2364E
But it Still not appear on bios
April 23rd, 2009, 7:03
what exactly is the disk doing when powered? Changing the circuit board will not help you.
April 23rd, 2009, 8:58
If u Disk its not showed at BIOS or show´s LBA on 0 its a SA problem ,wich cannot be repaired exchanging PCB its a problem on "engineering tracks"
April 23rd, 2009, 9:56
Did you try swapping platters?
I believe its a 2nd most popular thing people do after PCB swap.
April 23rd, 2009, 10:50
did you swap flash (AKA ROM) ?
April 23rd, 2009, 10:59
OOH are these having LBA 0 issues too???
April 23rd, 2009, 11:31
I hope so. I'm now rubbing my hands with glee
May 13th, 2009, 3:14
I am also experiencing the problem you are having with your harddisk. I am also using the same harddisk.
May 13th, 2009, 4:36
Of course they have...
May 13th, 2009, 6:55
If not appear in BIOS, and you dont tell-us if the model appear at all or just show 0MB in Bios ?
maybe it could have two Problems.
- Head Problem ( if the disk was drop)
May 13th, 2009, 17:40
You need to post a terminal log....
May 16th, 2009, 21:55
I also want to know, this kind of breaks down I see a lot of
Powered by phpBB © phpBB Group.