Seagate 320 GB (ST3320820A) drive doesn't work. Removed drive from Iomega portable drive enclosure. Plugged drive into another computer, still not recognized. As slave, drive became warm, while master drive remained cool. Drive spins, but does not make excessive noise (no grinding or clicking). Shows up in BIOS as "0 GB" but does not show drive type, etc. Would like to recover data if possible so I'm looking for any suggestions (such as buying another drive and swapping PC board, etc). Thank you.

upload PCB photo please ,,,












XRONIS

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com

Hi,

Are you looking for DIY solution then search the internet or if the data is critical go to a pro in your area.

DIY:
Refer : tutorial-resolve-lba-seagate-7200-bios-don-recognize-t11040-60.html
http://www.msfn.org/board/solution-seag ... -1700.html

- These two urls have lot of info on how to get to know/resolve the error..
- Post the error what is coming in the terminal

Happy reading !!!! Till then ...

Cheers,

<img src="http://img.photobucket.com/albums/v238/AzianGoOkGrL/IMG_3137.jpg">

The DIY "solution" to which likeminders posted the link to is for 7200.11 series drives, not 7200.10 like yours. Completely different.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

it seems no PCB problem.

_________________
data recovery service[/b]