Seagate Barracuda 7200.12 FW CC44

[cuudulieu]

Seagate Barracuda 7200.12 stopped working

Hi guys,
Sorry for my bad English!

I have a Seagate Barracuda HDD with the following specifications:
Family: 7200.12
Model: ST3250318AS
Size: 250Gbytes
P/N: 9SL131-300
Firmware: CC44
When I looked in the BIOS model, saw that my Seagate HDD was recognized as 0MB and 0LBA!!

I have tried with china PC 3000; with dku5
but failed

someone please help me?

I use this command with Dku5 , but without success
What is the command line for CC44 7200.12 ?

to 7200.11, but 7200.12 ?

On Terminal press CTRL + Z:

F3 T>

F3 T> / 2

F3 2> Z

Spin down complete
Time elapsed msecs 0.147
F3 2>

Wait 5sec and remove the paper separating the Moto phone. Now screw just enough to make a link between PCB and hda (just be calm, relax!).

Then, press CTRL + Z again:

F3 2> U

Spin up Complete
Time elapsed 7.457 seconds (if you get this msg you used good until everything here)
F3 2> / 1

F3 1> N1

F3 1> / T

F3 T> <<<At this step you need to pull cable sata POWER OFF, wait 10sec HDD signal, and then back to POWER. (Not the PCB!).

When done, press CTRL + Z.

F3 T>

F3 T> I4, 1.22

F3 T>

F3 T> M0, 2.2 ,,,,, 22 <<<This command takes a little over a minute to complete!
WR max retries = 00, Max Rd retries = 00, T-Max ECC Level = 14, Max retries = 00C8 certification Rewrite

User format partitions 5% complete, Area 00, Pass 00, LBA 00004339, 00000080 ErrCode, Time elapsed 05 seconds 0 minutes
Users successfully format the partition - 0 minutes 05 seconds time elapsed

F3 T>

someone please help me?

[CK]

China PC3000 eh? That's very professional of you

[Corsari]

cuudulieu,

where are you (which nation)? I'm in italy.

Maybe I can help you.

Take care

R.

[networkpc3000]

China PC3000 eh? That's very professional of you

this is very old copy version. don't support new drive. don't have update..............

[cuudulieu]

can not be used DKU5 (7200.11) for 7200.12 FW CC44 . I have tried
-I bought PC300 UDMA ACE subjects , who have contact

[cuudulieu]

2 / Fimrware 7200.11 ST 3500320NS IBM
I have a hard drive Seagate (from IBM Server)
ST 3500320NS ERRO FIMRWARE

I have tried with dku5
On Terminal press CTRL + Z: not found "F3 T>"
but failed


someone please help me?


DKU5 good, board good. I have successfully hdd 7200.11 STxxxxAS but 7200.11 STxxxxNS failed

[vonguyenrecovery]

VERY GOOD?????

[cuudulieu]

I do not know it, I NEED DATA . Can you help me ?

Y! : khoiphucdulieu

Email: datviet@cuudulieu.com

[Corsari]

You are off topic.
This thread is about ST31000528AS with firmware CC34.

Do anybody fixed it?

Thank you
R.