Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
ddd123
 Post subject: Breaked 7200.11 fix procedure
PostPosted: June 16th, 2010, 9:47 
Offline

Joined: March 2nd, 2006, 11:14
Posts: 165
Hello

Can anybody help

What to do, when was interupted the m0,2,2,,,,,22 procedure
on Seagate 7200.11?
It was powered off the drive in 1 second after start m0 command.

Now is not possible to get F3 T>

THANKS for soon reply
Top
 Profile  
 
poehere
 Post subject: Re: Breaked 7200.11 fix procedure
PostPosted: June 16th, 2010, 14:04 
Offline
User avatar

Joined: February 27th, 2009, 3:26
Posts: 1721
Location: French Polynesia Tahiti
What tools are you using on this one? Were you sure before doing this that the drive had this error. ACE now has a new script in the program for this problem should follow it if the drive has the standard busy problem. If not you do not have toold this could be a problem and maybe you have bricked your drive.

_________________
Iorana Haraharaini
Top
 Profile  
 
BlackST
 Post subject: Re: Breaked 7200.11 fix procedure
PostPosted: June 16th, 2010, 15:27 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7474
Location: ITALY
Ann , the problem is that power was cut during m0 command...
Top
 Profile  
 
fzabkar
 Post subject: Re: Breaked 7200.11 fix procedure
PostPosted: June 16th, 2010, 19:15 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15529
Location: Australia
ddd123 wrote:
Hello

Can anybody help

What to do, when was interupted the m0,2,2,,,,,22 procedure
on Seagate 7200.11?
It was powered off the drive in 1 second after start m0 command.

Now is not possible to get F3 T>

THANKS for soon reply

Send it to Seagate / i365. Their data recovery service will probably be free, or would have been free had the drive been received in its original state.

Worth a try, anyway.
Top
 Profile  
 
networkpc3000
 Post subject: Re: Breaked 7200.11 fix procedure
PostPosted: June 16th, 2010, 19:28 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
ddd123 wrote:
It was powered off the drive in 1 second after start m0 command.
Now is not possible to get F3 T>

have you try conntact PCB only and check?

_________________
data recovery service[/b]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 159 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group