7200.12 ERORR FIRMWARE CC38

[cuudulieu]

Hi guys,
I have a Seagate Barracuda HDD with the following specifications:
Seagate 160Gb 7200.12
Model : ST3160318AS
FW : CC38
No detect

I have tried with dku5:

F3 T>/1

F3 1>N1

F3 1>N1

Init SMART Fail
LED:000000CC FAddr:0024E2DB
LED:000000CC FAddr:0024E2DB
LED:000000CC FAddr:0024E2DB
LED:000000CC FAddr:0024E2DB
LED:000000CC FAddr:0024E2DB


what means this message?

someone please help me?

[xcdzsxj]

用11代盘指令修复报错：

F3 2>/1
F3 1>N1
Init SMART Fail
LED:000000CC FAddr:0024EE4

接COM线：先用LBA为0故障的M0指令来修复输入N1报错的问题，修复完后，再在/1级下输入N1来修复SMART故障导致的不认盘故障

[RCZ]

Same problem here. Have you find a solution ?

[guru]

slj.c d k gdfdxgk b

[RCZ]

[cuudulieu]

NEED DATA this hard drive
I"m try :

.
.
.
.
F3 T>V4

Reassigned Sectors List
Entries: 0000, Retrieved: 0000, Alts: 0000, Removed: 0000, Pending: 0000, GList:
0000, RList: 0000

Idx LBA PBA LLLCHS of LBA PLPCHS of PBA SFI Hours Msecs Status
BBM Mask

F3 T>V1
User Slip Defect List
log log log phys phys
LBA span cumm cyl hd sctr zn cyl sctr SFI PBA
0 0 0 0 0 0 0 0 0 3 0

Head 0: entries 1 slips 0
Total Entries 1 Total Slips 0

F3 T>i4,1,22
F3 T>
Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002A185
ASCII Diag mode

F3 T>m0,2,2,0,0,0,0,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewr
ite Retries = not supported

Init SMART Fail
LED:000000CC FAddr:0024E2DB

=> someone please help me?

[qqlove008]

hardly anyone is able to solve the problem now.
i tried several com command and none works.
someone can deel with it,will he kindly show us some info?

[qqlove008]

T>V4 command views G-List,and i4,1,22 clears it.

[BlackST]

Not true that nobody know. P.s. Clearing G is NOT ALWAYS A GOOD IDEA. I cannot say more.

[kibul]

Hi, i have the same issue.
always get a fail after trying to regen translator or clear smart. drive is BSY, but the calibrating souns is ok.

Init SMART Fail
LED:000000CC FAddr:0024E4A


any idea? BlackST, seems you have a solution?
thank you

[BlackST]

Check the ENTIRE firmware for problems and IF the drive is ... "fully functional".

But this means you cannot do everything ONLY by terminal and an adapter !

[hddguy]

hardly anyone is able to solve the problem now.

Just because nobody publicly posted a solution here you think nobody can solve it?

Already in this case GLIST is cleared, so maybe there are other problems now anyway.

For this case I suggest you outsource it to somebody who can handle it.