Hi there!
I need some help
The faulty drive is a WD20EARX-00PASB0. The drive does not spins up. After i changed the PCB and transferred the rom the drive spins up, but clicks, and spins down.
With donor WD20EARX-00PASB0 i did a hot swap, and i read some firmware modules, but i cannot read all. Now i know the firmware map (0001.rpm) is not the same of the faulty drive, and the hot swap drive, thats why i cannot read all of the modules.
I made a hybrid firmware of hot swap and the patient drive, and i uploaded it to a patient drive. Now the patient drive recognized fine, but i cannot access to data.
With WDR i cleared the translator and the translator regeneration finished with this error message: "3C15 =FMT_PLIST_PSN_OUT OF RANGE"
When i upload the entire firmware of the hot swap drive, the translator regeneration could finish with no error.
Do anybody have any deal how to solve this problem?
Here are the patient and the hot swap drive's firmwares in one archive file:
http://www68.zippyshare.com/v/19924685/file.htmlThe firmware was read out with Atola Insight.
Thanks for any help.