As always on this board I'll start my topic with 'I have a hard disk drive...'
I have a one year old Seagate HDD:
ST31000528AS 1TB Barracuda 7200.12
My hard drive was working in RAID 0 mode with another one
Few days ago the drive decided to be invisible in BIOS (in two computers on different sata cables and with different psu's).
It's sounds good when it's starting (the same noises in the same time as the other 1TB Seagate starting), no clicking etc.
The drive seems to spin up normally. I've never dropped this HDD.
This drive was the storage one so there's some sentimental data on it.
If there's someone who could guide me with diagnosing or/and trying to revive this drive it will be much appreciated.
After this happened this drive is just sitting here and nobody was trying anything with it.
I've purchased a usb terminal for diagnosing it and I'm searching and reading any info that I cold find on this matter.
I'm not going to do anything without you guys guiding me through new info on this HDD.
The last thing I've planned when all other will fail is to try a 7200.11 BSY bug method (Yes, I know that there's a 0,01% percent chance that this will help).
Sorry for my bad English...