October 20th, 2011, 5:27
ROb wrote:I can help you solve this problem PM me...
November 4th, 2011, 9:36
moiz wrote:ROb wrote:I can help you solve this problem PM me...
I am also experiencing this issue. Any more information regarding a fix?please help,,,,,,having pics of my granny who died last week...............................please help me brother rob..........thanks
November 4th, 2011, 9:38
ajayvats wrote:bochen415 wrote:You can always PM me or the author of the fix and ask
HI,
Me too having same problem with my ST3250318AS CC44 hdd. Can u pleade give the fix for the 7200.12 series as i am in need of the same.
PS. COuld not find any link to send pm.
November 7th, 2011, 17:33
November 7th, 2011, 18:39
December 9th, 2011, 3:54
neowakesup wrote:Seriously guys, plz share the solution IN the forum...
ROb wrote:start your drive by shorting read channels
F3 T>/2
F3 2>Z
Spin Down Complete
Elapsed Time 6.035 secs
[Remove the shorting and give following command]
F3 2>U
HighPowerMode
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 3.573 secs
F3 2>/
F3 T>m0,2,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewr
ite Retries = not supported
User Partition Format Successful - Elapsed Time 0 mins 00 secs
F3 T>/1
F3 1>N1
Clear SMART is completed.
F3 1>
[disconnect the power, wait couple seconds and connect again]
Rst 0x08M
(P) SATA Reset
http://qbhn.neostrada.pl/ST31000528AS.jpg
http://qbhn.neostrada.pl/02.jpg
December 13th, 2011, 7:44
June 7th, 2012, 10:14
Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002B001
June 7th, 2012, 10:22
June 7th, 2012, 11:47
August 9th, 2012, 18:41
bochen415 wrote:neowakesup wrote:Seriously guys, plz share the solution IN the forum...
Here's the fix only for the ST31000528AS 1TB Barracuda 7200.12 Firmware: CC38 model:ROb wrote:start your drive by shorting read channels
F3 T>/2
F3 2>Z
Spin Down Complete
Elapsed Time 6.035 secs
[Remove the shorting and give following command]
F3 2>U
HighPowerMode
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 3.573 secs
F3 2>/
F3 T>m0,2,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewr
ite Retries = not supported
User Partition Format Successful - Elapsed Time 0 mins 00 secs
F3 T>/1
F3 1>N1
Clear SMART is completed.
F3 1>
[disconnect the power, wait couple seconds and connect again]
Rst 0x08M
(P) SATA Reset
August 28th, 2012, 15:22
Paky wrote:bochen415 wrote:neowakesup wrote:Seriously guys, plz share the solution IN the forum...
Here's the fix only for the ST31000528AS 1TB Barracuda 7200.12 Firmware: CC38 model:ROb wrote:start your drive by shorting read channels
F3 T>/2
F3 2>Z
Spin Down Complete
Elapsed Time 6.035 secs
[Remove the shorting and give following command]
F3 2>U
HighPowerMode
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 3.573 secs
F3 2>/
F3 T>m0,2,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewr
ite Retries = not supported
User Partition Format Successful - Elapsed Time 0 mins 00 secs
F3 T>/1
F3 1>N1
Clear SMART is completed.
F3 1>
[disconnect the power, wait couple seconds and connect again]
Rst 0x08M
(P) SATA Reset
August 28th, 2012, 15:23
August 28th, 2012, 15:29
labtech wrote:Does the drive spin down?
August 28th, 2012, 15:30
August 28th, 2012, 15:47
labtech wrote:Pretty sure the drive has internal read-write hardware issue and/or media damage.
Was it dropped or sustained any kind of physical shock?
August 28th, 2012, 16:16
August 28th, 2012, 16:41
August 28th, 2012, 16:50
labtech wrote:Without experience in this field, no DIY solution I am afraid.
August 28th, 2012, 16:58
SAjunky wrote:cloverex:
Did you complete procedure with reseting SMART before cycling power? If not, I guess, you need to repeat entire procedure.
Powered by phpBB © phpBB Group.