All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 144 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 8  Next
Author Message
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: April 29th, 2012, 6:11 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2785
Location: Kuwait
aena9200 wrote:
Actually it was me who laughed a lot when I read you comment here #p134544 . And I cannot see what was wrong with my comment I said I am sure it is doable and it is just a matter of time to know how it works, probably you do not understand english?.
Of course It is up to you to read my comments or not, but I wanted to give you an advice from a more experienced engineer, do not dismiss things out of hand unless you know what you are talking about. Anyway good luck with your late findings.


Open your eyes, and look @ the date stamp , i dono who cannot read ENGLISH here, me or you

PostPosted: July 19th, 2011, 10:06

DO YOU NEED A DIGITAL MICROSCOPE to figure this out my dear. :shock:
all the best

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: April 29th, 2012, 6:55 
Offline

Joined: May 14th, 2011, 17:44
Posts: 22
Location: United
huh?
LOL


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 12th, 2012, 19:00 
Offline

Joined: June 12th, 2012, 18:45
Posts: 1
Location: Saudi Arabia
Dear Einstein9

Please send me your contact details,,, I have the same problem >> I forget my WD Passport password and I need to contact you to see if you can help
Regards,,,
Muhammad AL Lahham
mallahham@yahoo.com
00966556279278


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 13th, 2012, 4:02 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2785
Location: Kuwait
letio wrote:
Dear Einstein9

Please send me your contact details,,, I have the same problem >> I forget my WD Passport password and I need to contact you to see if you can help
Regards,,,
Muhammad AL Lahham
mallahham@yahoo.com
00966556279278


Dear Letio,

It is LIMITED to the Forensic cases ONLY - NO OTHER
if you were one of them, they know very well how to get in touch, Public Clients/Companies Am sorry we do not do.

thank you

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 14th, 2012, 12:47 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
Quote:
the Smartware Bypass Stays in Specific Memory Address and when we execute the Unlock.exe file
it reads from specific sector @ the end, and verifies the contents and brings
back the Password window, where here we are forcing it to read OUR default Password
and it confirms it as YES IT IS CORRECT.

Do you mean to say Unlock.exe reads sector with encryption keys from the back of the drive? So it's actually transfered via USB to Unlock.exe and Unlock.exe decides to open the drive or not?


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 18th, 2012, 23:05 
Offline

Joined: June 18th, 2012, 22:54
Posts: 2
Location: france
Hello ^^

my wd passport is locked, and the hard drive ask a password to unlock, but i didn't put a password before, so i don't understand :shock:

never will buy a wd products for the future... :shock:

If someone knows how to repair that please ?

Thanks a lot :)


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 20th, 2012, 12:27 
Offline

Joined: June 18th, 2012, 22:54
Posts: 2
Location: france
Nobody knows please... ? :weep:

Thanks


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 20th, 2012, 13:25 
Offline

Joined: March 3rd, 2009, 15:27
Posts: 131
Location: Canada
Hi, I think I came across some info that explained it, and maybe more, but too busy to search for it .


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 20th, 2012, 13:38 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
Repair is likely not possible. Data recovery by certain experts maybe.

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: June 20th, 2012, 14:26 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
It probably tricks unlock.exe into mounting the partition. I believe that the partition will still be encrypted therefore worthless. Or maybe I am wrong?




Starling wrote:
Quote:
the Smartware Bypass Stays in Specific Memory Address and when we execute the Unlock.exe file
it reads from specific sector @ the end, and verifies the contents and brings
back the Password window, where here we are forcing it to read OUR default Password
and it confirms it as YES IT IS CORRECT.

Do you mean to say Unlock.exe reads sector with encryption keys from the back of the drive? So it's actually transfered via USB to Unlock.exe and Unlock.exe decides to open the drive or not?

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 19th, 2012, 5:58 
Offline

Joined: July 7th, 2010, 4:45
Posts: 924
Location: UK
guru wrote:
It probably tricks unlock.exe into mounting the partition. I believe that the partition will still be encrypted therefore worthless. Or maybe I am wrong?




Starling wrote:
Quote:
the Smartware Bypass Stays in Specific Memory Address and when we execute the Unlock.exe file
it reads from specific sector @ the end, and verifies the contents and brings
back the Password window, where here we are forcing it to read OUR default Password
and it confirms it as YES IT IS CORRECT.

Do you mean to say Unlock.exe reads sector with encryption keys from the back of the drive? So it's actually transfered via USB to Unlock.exe and Unlock.exe decides to open the drive or not?



Yes einstein9's way tricks the smartware unlock.exe software in to reading his known password & then mounts the partition. The partition will then be decrypted as the key is stored in the SA. Like other members here that can bypass the WD Smartware password (including me :D ), just the method might be different & take longer than einstein9 software method.

Loki


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 19th, 2012, 8:15 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2785
Location: Kuwait
loki wrote:
guru wrote:
It probably tricks unlock.exe into mounting the partition. I believe that the partition will still be encrypted therefore worthless. Or maybe I am wrong?




Starling wrote:
Quote:
the Smartware Bypass Stays in Specific Memory Address and when we execute the Unlock.exe file
it reads from specific sector @ the end, and verifies the contents and brings
back the Password window, where here we are forcing it to read OUR default Password
and it confirms it as YES IT IS CORRECT.

Do you mean to say Unlock.exe reads sector with encryption keys from the back of the drive? So it's actually transfered via USB to Unlock.exe and Unlock.exe decides to open the drive or not?



Yes einstein9's way tricks the smartware unlock.exe software in to reading his known password & then mounts the partition. The partition will then be decrypted as the key is stored in the SA. Like other members here that can bypass the WD Smartware password (including me :D ), just the method might be different & take longer than einstein9 software method.

Loki



heheh, i used to Attach this as a Signature always: I KNOW I CAN DO IT, ITS JUST THE MATTER OF TIME

very good news Loki really :mrgreen:

and really good luck. :wink:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 20th, 2012, 15:03 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1080
Location: Angel Data Recovery
I am quite sure there is GREAT misunderstood with this: {bypass the WD Smartware password}
Because bypassing "selflocked drive" and locked with real user password is a big difference.

_________________
Angel Data Recovery


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 21st, 2012, 13:49 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
:wink: agreed

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 23rd, 2012, 23:59 
Offline

Joined: July 23rd, 2012, 21:58
Posts: 3
Location: California
Please help, I have been trying to unlock My passport Essentials for the last 6 months...... :( :cry: :cry: :cry: :cry:
My life is on this drive...
If there is anything that can be done to get this data please pm me or email me at sexy_ladka at yahoo com

Many thanks in advance...


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 24th, 2012, 0:10 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3636
Location: Massachusetts, USA
nabiji wrote:
Please help, I have been trying to unlock My passport Essentials for the last 6 months...... :( :cry: :cry: :cry: :cry:
My life is on this drive...
If there is anything that can be done to get this data please pm me or email me at sexy_ladka at yahoo com

Many thanks in advance...

Did you forget the password if one was ever set up? Or is the drive damaged in a matter that is preventing you from unlocking it?

_________________
Hard Disk Drive, SSD, USB Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 24th, 2012, 1:31 
Offline

Joined: July 23rd, 2012, 21:58
Posts: 3
Location: California
I forgot the password.... :( :( :( :( :(


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 24th, 2012, 4:01 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1080
Location: Angel Data Recovery
nabiji wrote:
I forgot the password.... :( :( :( :( :(


Nice email, are you female? :roll:

_________________
Angel Data Recovery


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 24th, 2012, 10:05 
Offline

Joined: July 23rd, 2012, 21:58
Posts: 3
Location: California
no its my GF email address... :wink:


Top
 Profile  
 
 Post subject: Re: For those who had DOUBT in my Smartware Solution
PostPosted: July 24th, 2012, 10:40 
Offline

Joined: July 7th, 2010, 4:45
Posts: 924
Location: UK
DR-Kiev wrote:
nabiji wrote:
I forgot the password.... :( :( :( :( :(


Nice email, are you female? :roll:


nabiji wrote:
no its my GF email address... :wink:



:boxing: :lol: :lol: :lol:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 144 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6 ... 8  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: ludespeedny and 58 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group