View topic - 7200.12

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

7200.12

Page 2 of 2

[ 31 posts ]

Go to page Previous 1, 2

Previous topic | Next topic

Author

Message

merty

Post subject: Re: 7200.12

Posted: November 21st, 2012, 17:41

Joined: November 21st, 2012, 17:33
Posts: 1
Location: ISTANBUL

Hello

Im having just the same issue with the same harddrive

Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002B001

Busy...

MODEL: ST3500418AS
FIRMWARE: CC38

how did you fixed it ? can you place write ?? I cannot PM as Im new in this forum. I'll be happy if you can help me on this .
really need this data on harddrive

Top

Snakez

Post subject: Re: 7200.12

Posted: November 23rd, 2012, 3:17

Joined: November 23rd, 2012, 2:37
Posts: 2

Rough...

Snakez.

Top

uru1345

Post subject: Re: 7200.12

Posted: November 27th, 2012, 18:15

Joined: November 27th, 2012, 17:04
Posts: 1
Location: electronic

please help about short circuit thanks hddguy,

Top

the_specialist7_6

Post subject: Re: 7200.12

Posted: July 4th, 2013, 12:38

Joined: June 29th, 2013, 22:00
Posts: 4
Location: Argentina

Hey, I have the same problem....! please, you could help a lot of us by posting your solution

Top

tri satya

Post subject: Re: 7200.12

Posted: November 7th, 2013, 8:18

Joined: November 7th, 2013, 7:58
Posts: 2
Location: indonesia

sempre wrote:

hddguy wrote:

You need short circuit for this

CHECK PM

need short circuit picture for my troble...my board 100532367 rev b....before and after thanks

Top

tri satya

Post subject: Re: 7200.12

Posted: November 8th, 2013, 8:30

Joined: November 7th, 2013, 7:58
Posts: 2
Location: indonesia

tri satya wrote:

sempre wrote:

hddguy wrote:

You need short circuit for this

CHECK PM

need short circuit picture for my troble...my board 100532367 rev b....before and after thanks

No HOST FIS-ReadyStatusFlags 2002B001
ASCII Diag mode

F3 T>/2

F3 2>z

ExecuteSpinRequest

HighPowerMode
Failed to load overlay 00000004
LED:000000CC FAddr:0028931D

Top

rosanto27

Post subject: Re: 7200.12

Posted: December 29th, 2014, 13:34

Joined: December 29th, 2014, 13:30
Posts: 2
Location: Italy

I need short circuit for 100517995 Rev.C, help me please.

Top

fzabkar

Post subject: Re: 7200.12

Posted: December 29th, 2014, 15:29

Joined: September 8th, 2009, 18:21
Posts: 15525
Location: Australia

Tip: How to identify the Read Channel test points:
http://www.alexsoft.org/viewtopic.php?f=24&t=123&p=149

_________________
A backup a day keeps DR away.

Top

rosanto27

Post subject: Re: 7200.12

Posted: February 15th, 2015, 9:20

Joined: December 29th, 2014, 13:30
Posts: 2
Location: Italy

In my 7200.12 100517995 REV C i can't find the test points for short,please, can anyone help me? Thanks.

Attachments:

20150215_140954.jpg [ 2.05 MiB | Viewed 7840 times ]

20150215_140920.jpg [ 2.21 MiB | Viewed 7840 times ]

Top

crystalrajasthan

Post subject: Re: 7200.12

Posted: May 30th, 2017, 4:30

Joined: October 8th, 2012, 5:29
Posts: 44
Location: India

sempre, Please tell how you solve the issue.... send PM

Top

galaxy

Post subject: Re: 7200.12

Posted: June 1st, 2017, 2:10

Joined: January 31st, 2014, 8:46
Posts: 242
Location: India

oriolclausells, friend this hdd has latest firmware u need to short the pcb after second spinup msg appear in cmd after complete calibration of hdd

Top

Page 2 of 2

[ 31 posts ]

Go to page Previous 1, 2

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum