Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Looking for loader (WD5000AAKB-00YSA0)

March 26th, 2015, 7:33

Hello Everyone!
I'm looking for WD5000AAKB-00YSA0 firmware. Microcode revision is 580076
Tornado 2 PPMR PATA.
The most important modules are:
01,11, and 12.
Please share if you have!
Thank you!

Re: Looking for loader (WD5000AAKB-00YSA0)

March 26th, 2015, 9:37

Did you look in forum files?

Next time please do.

http://files.hddguru.com/download/PC-30 ... nado%202R/

Re: Looking for loader (WD5000AAKB-00YSA0)

March 26th, 2015, 9:43

Thank you harddrivespecialist!
I'm looked the forum files, thank you, mostly the first i do (thanks for uploaders).
This is an AAKB PATA drive.
I tried the overlay with same microcode revision number of a WD3200AAJS SATA drive, but it's not compatible :-(

Re: Looking for loader (WD5000AAKB-00YSA0)

March 26th, 2015, 10:35

There is many other resources you might want to try.

Re: Looking for loader (WD5000AAKB-00YSA0)

March 26th, 2015, 13:50

:roll:
:!:

Re: Looking for loader (WD5000AAKB-00YSA0)

March 26th, 2015, 13:57

You have asked for specific firmware and was directed to it.

I simply don't know what else you need or if you have applied it correctly.

Re: Looking for loader (WD5000AAKB-00YSA0)

March 27th, 2015, 4:14

Thank you again.

With WD3200AAJS-00VWA0-12.01B02-00580076 overlay SeDiv says: "VSCE_OFF_TOO_LARGE"
With WD3200AAJB-00WGA0-00.02C01-00580076 overlay SeDiv says: "OVM_ERR_NOT_COMPATIBLE"

Have you another solution?

Now i know, the FW revision is 12.01C02

Re: Looking for loader (WD5000AAKB-00YSA0)

March 27th, 2015, 4:34

With WD5000AAJS-32YFA0-12.01C02-00580076 overlay SeDiv says: "VSCE_OFF_TOO_LARGE"
Post a reply