All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 39 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 15th, 2019, 15:07 
Offline

Joined: March 7th, 2009, 12:43
Posts: 940
Location: Angel Data Recovery
BuZa wrote:
Who has the firmware for HUC109060CSS600 (Cobra E), HUC106060CSS600, HUC106030CSS600 (Cobra D), lay out, please. I have these discs under VPS DKR5D, DKR5C. It seems to me, I have made much progress in solving these case. I need different versions of the firmware for experiments. So far I have only A5B0 version.


You can update to A360 and to A440 and do whatever you wanted.
https://www.dell.com/support/search/us/ ... langFacet=[en]

_________________
Angel Data Recovery


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 22nd, 2019, 19:12 
Offline

Joined: February 15th, 2019, 8:56
Posts: 9
Location: Moscow
DR-Kiev wrote:

You can update to A360 and to A440 and do whatever you wanted.
https://www.dell.com/support/search/us/ ... langFacet=[en]


Unfortunately, Dell utilities cannot rewrite flash these discs.


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: March 11th, 2019, 5:11 
Offline

Joined: February 24th, 2019, 23:37
Posts: 4
Location: Singapore
Yes You need custom software to do it, off the shelve utilities wont work.

Refer to the pictures attached.

Hitachi Storage - GHGH ---> IBM - JE2F

IBM - JE2F ---> HP - HPDC


Attachments:
HITACHI-DKR5D-J600SS-J2E7.jpg
HITACHI-DKR5D-J600SS-J2E7.jpg [ 176.78 KiB | Viewed 8866 times ]
HITACHI-DKR5D-J600SS-HPDC.jpg
HITACHI-DKR5D-J600SS-HPDC.jpg [ 175.44 KiB | Viewed 8866 times ]
HITACHI-DKR5D-J600SS-GHGH.jpg
HITACHI-DKR5D-J600SS-GHGH.jpg [ 175.04 KiB | Viewed 8866 times ]
Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: May 11th, 2019, 21:07 
Offline

Joined: January 17th, 2019, 12:54
Posts: 1
Location: moscow
BuZa wrote:
Who has the firmware for HUC109060CSS600 (Cobra E), HUC106060CSS600, HUC106030CSS600 (Cobra D), lay out, please. I have these discs under VPS DKR5D, DKR5C. It seems to me, I have made much progress in solving these case. I need different versions of the firmware for experiments. So far I have only A5B0 version.


I have B5B0 and A440 FW, both standard from wdc support.

I'm stuck with 60pc. VPS DKR5D and DKR5C - can you reflash? I'm in Moscow too.


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: June 14th, 2019, 13:26 
Offline

Joined: February 15th, 2019, 8:56
Posts: 9
Location: Moscow
hddware wrote:
Yes You need custom software to do it, off the shelve utilities wont work.

Refer to the pictures attached.

Hitachi Storage - GHGH ---> IBM - JE2F

IBM - JE2F ---> HP - HPDC



Have you written your program that can replace firmware in these disks?


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: August 20th, 2019, 8:47 
Offline
User avatar

Joined: August 20th, 2019, 7:49
Posts: 7
Location: Earth
BuZa wrote:
DR-Kiev wrote:
You can update to A360 and to A440 and do whatever you wanted.
https://www.dell.com/support/search/us/ ... langFacet=[en]

Unfortunately, Dell utilities cannot rewrite flash these discs.

They should. If they can flash the same exact model, why can't they be tricked to re-flash it?


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: August 20th, 2019, 9:55 
Offline
User avatar

Joined: August 20th, 2019, 7:49
Posts: 7
Location: Earth
And talking about ticking this seems to be a very interesting article

http://blog.eblend.ca/2015/04/flash-del ... agate.html


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: November 6th, 2019, 22:35 
Offline

Joined: November 6th, 2019, 11:36
Posts: 1
Location: China
hddware, Could you please tell me how to do it? Can I pay for it


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: November 17th, 2019, 19:35 
Offline

Joined: November 17th, 2019, 19:31
Posts: 4
Location: Moscow
Has anyone found a solution to unlock this drives for I/O operations, formated in 512b?
I've got a bunch of these as well.


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: November 17th, 2019, 19:37 
Offline

Joined: November 17th, 2019, 19:31
Posts: 4
Location: Moscow
BuZa wrote:
Who has the firmware for HUC109060CSS600 (Cobra E), HUC106060CSS600, HUC106030CSS600 (Cobra D), lay out, please. I have these discs under VPS DKR5D, DKR5C. It seems to me, I have made much progress in solving these case. I need different versions of the firmware for experiments. So far I have only A5B0 version.


I do! PM me. I am in Moscow as well


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: November 29th, 2019, 6:19 
Offline

Joined: July 15th, 2019, 18:36
Posts: 3
Location: Moscow
hi boyz, any news here about this drives?


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: November 29th, 2019, 6:53 
Offline

Joined: September 26th, 2016, 4:26
Posts: 63
Location: Russia
Да какие новости? Шьем потихоньку. / What news? Reflash slowly.
https://yadi.sk/i/E13jnHNVT5x6RA
https://yadi.sk/i/xqiGPpthUzrmgA


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 17th, 2020, 16:08 
Offline

Joined: February 15th, 2019, 8:56
Posts: 9
Location: Moscow
DKR5*-***** disks reprogrammed succeeded. But the procedure requires intervention with special equipment. In the process of updating the firmware on these disks, several checks are performed, which cannot be performed only using software methods with the help of controller commands.

https://www.ebay.com/itm/184111761571


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 17th, 2020, 16:12 
Offline

Joined: February 15th, 2019, 8:56
Posts: 9
Location: Moscow
DKR5*-***** disks reprogrammed succeeded. But the procedure requires intervention with special equipment. In the process of updating the firmware on these disks, several checks are performed, which cannot be performed only using software methods with the help of controller commands.

See jn ebay item number 184111761571


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 17th, 2020, 17:13 
Offline
User avatar

Joined: August 20th, 2019, 7:49
Posts: 7
Location: Earth
OK, that is some good news BUT looking at the price tag of US$100(!!!!!!!!!!!!!!) :wink: excluding S&H I assume this is not for the average home user.


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 17th, 2020, 19:19 
Offline

Joined: February 15th, 2019, 8:56
Posts: 9
Location: Moscow
Belial wrote:
OK, that is some good news BUT looking at the price tag of US$100(!!!!!!!!!!!!!!) :wink: excluding S&H I assume this is not for the average home user.


This is for a lot of 7 pcs.


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 18th, 2020, 13:52 
Offline
User avatar

Joined: August 20th, 2019, 7:49
Posts: 7
Location: Earth
BuZa wrote:
Belial wrote:
OK, that is some good news BUT looking at the price tag of US$100(!!!!!!!!!!!!!!) :wink: excluding S&H I assume this is not for the average home user.


This is for a lot of 7 pcs.


There are a few home users without any special equipment having those HDDs though.


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 18th, 2020, 16:03 
Offline

Joined: February 15th, 2019, 8:56
Posts: 9
Location: Moscow
Belial wrote:

There are a few home users without any special equipment having those HDDs though.


The Chinese have long learned to reprogram them. Sell for a long time. Likely bought from the Chinese.


Top
 Profile  
 
 Post subject: Re: HGST SAS Drive Firmware Needed
PostPosted: February 21st, 2020, 20:00 
Offline

Joined: February 21st, 2020, 19:54
Posts: 1
Location: Tulskaya oblast
E123, ребят у кого есть прошивка для HUC106060CSS600 ? Запарился, не могу прошиться!
Hi guys who have firmware for HUC106060CSS600? Can't flash them... tired.
Please PM me


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 39 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: MSN [Bot] and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group