October 4th, 2015, 6:01
October 5th, 2015, 3:28
October 7th, 2015, 3:26
October 8th, 2015, 3:59
gps31 wrote:I followed your steps but in hdat2 i can't find "Advanced Power Management (APM) Feature Set" but there is only "Power Management Feature Set" Which is in enabled state no options to disable it
Pls advice
December 5th, 2015, 16:44
December 9th, 2015, 17:54
March 12th, 2016, 5:20
June 21st, 2016, 16:58
FunkyRider wrote:HOWTO: Disable Seagate DM001 APM Head Parking *Permanently*
June 22nd, 2016, 5:25
July 30th, 2016, 3:57
January 7th, 2017, 12:16
I'm probably too late, but I've had this problem too and have successfully solved it. Check https://www.hdat2.com/hdat2_faq.html, there is a solution:turbatus wrote:they're all colored red and i can't enter the Modify menu in any way(says command aborted). I tried this both with AHCI and IDE. In conclusion the APM resets to ON after a cold boot.
I solved the problem by enabling "SATA ESP" in my BIOS and then hotplugging the HDD after DOS boot. You can also just try to use another computer.Q2: How to bypass a Security and/or DCO frozen state?
A2: 1) The SECURITY FREEZE command is being set in the boot process. This will prevent any further SECURITY related commands being sent until the hard drive is power cycled. It is most likely your BIOS doing this. Look in your BIOS configuration/setup, but some BIOS's do not have an option to turn this off, so you may be required to find a different PC/BIOS.
2) Try to connect the drive to another controller channel (maybe the last one) or another position on the channel. Some BIOS's do not send the Freeze Lock command to all channel master/slave positions.
3) Hot-plug method: use this method at your own risk! When the computer is off unplug the data cable from this hard drive. Power on PC, boot into DOS and then plug the data cable of the hard drive back in. I hope that the program will find this disk.
January 30th, 2017, 13:52
February 19th, 2017, 9:40
February 19th, 2017, 10:59
February 19th, 2017, 13:20
rogfanther wrote:It could be something with the usb stick . If you can find another to try, and if possible of smaller sizes.
Also, check the instructions for Rufus to see if you are creating the drive correctly.
Also, for your sentence " plan to use it heavily", at least do not use it for valuable data,
February 19th, 2017, 14:39
Powered by phpBB © phpBB Group.