ST3500418AS

[unknown]

Need loader for this drive :

ST3500418AS
CC38
Pharaoh
Terminal output :
F3 T>V40
OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay

F3 T>

Original ROM file :

Thanks in advance.

Attachments

ROM.rar

(430.73 KiB) Downloaded 618 times

[unknown]

Any help will be appreciated.

[Evg71]

Hi
Find the update firmware for this Faraoh on Seagate site and do it.
https://apps1.seagate.com/downloads/request.html

[fzabkar]

Use a ROM and loader from a different firmware version.

Transfer adaptives to foreign ROM.

Start drive with foreign ROM, foreign loader, native adaptives.

Retrieve SA modules and tracks.

Build native loader from native resources and reinstall native ROM.

Start drive with native ROM and native loader.

[Evg71]

Use a ROM and loader from a different firmware version.

The partnumber must be same.

[fzabkar]

http://web.archive.org/web/201109151953 ... L-CC46.iso
http://www.seagate.com/staticfiles/supp ... L-CC3D.iso

http://www.users.on.net/~fzabkar/HDD/PH-CC46.TXT
http://www.users.on.net/~fzabkar/HDD/PH-CC3D.TXT

[unknown]

Thank you Mr.Frank.

I appreciate your kind help.

Thank you Evg71.

[fzabkar]

I have built a loader using these resources:

http://files.hddguru.com/download/MRT/S ... M9868W.rar

The relevant components were found on tracks 23, 28, 38, and 39, and in modules ~001E.rpm and ~001D.rpm.

Note that MRT's "loader" is gibberish.

I have followed the structure described in the following article.

Building a Seagate F3 loader from official firmware update:
http://www.hddoracle.com/viewtopic.php?f=59&t=1468

The only thing that puzzles me is the module type. I was expecting a module type of 0x4A (= overlay) but I found 0x0A instead.

The build time/date for the overlays is 14:25 Sept 18, 2009.

Attachments

ST3500418AS_CC38.rar

(174.67 KiB) Downloaded 594 times

[unknown]

Thank you very much Mr. Frank.

[galaxy]

HOW TO LOAD THIS FILE WITH TERMINAL ITS POSSIBLE ?????????????


https://www.facebook.com/Galaxy-Data-Re ... 230196828/

[pepe]

yes, it is. But not through ASCII diag mode.

[galaxy]

pepe, do you know my friend how to load loader file with terminal please give hints __research


and thanks to reapliye my question

[pepe]

pm sent...

[gps31]

Hello Pepe

Can u send details to me also

pls

[lerom]

pepe,

Sir, can you send me detail, please!

[Amarbir[CDR-Labs]]

Use a ROM and loader from a different firmware version.

Transfer adaptives to foreign ROM.

Start drive with foreign ROM, foreign loader, native adaptives.

Retrieve SA modules and tracks.

Build native loader from native resources and reinstall native ROM.

Start drive with native ROM and native loader.

Well,
Great approach

[lerom]

Spildit,
i see, thanks!