Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 4th, 2016, 9:58
Need loader for this drive :
ST3500418AS
CC38
Pharaoh
Terminal output :
F3 T>V40
OverlayCompatibilityCheck failed
Unable to load Diag Cmd Processor Overlay
F3 T>
Original ROM file :
Thanks in advance.
- Attachments
-
- ROM.rar
- (430.73 KiB) Downloaded 618 times
January 5th, 2016, 8:00
Any help will be appreciated.
January 5th, 2016, 9:07
Hi
Find the update firmware for this Faraoh on Seagate site and do it.
https://apps1.seagate.com/downloads/request.html
January 5th, 2016, 14:37
Use a ROM and loader from a different firmware version.
Transfer adaptives to foreign ROM.
Start drive with foreign ROM, foreign loader, native adaptives.
Retrieve SA modules and tracks.
Build native loader from native resources and reinstall native ROM.
Start drive with native ROM and native loader.
January 6th, 2016, 1:12
fzabkar wrote:Use a ROM and loader from a different firmware version.
The partnumber must be same.
January 6th, 2016, 9:41
Thank you Mr.Frank.
I appreciate your kind help.
Thank you Evg71.
January 13th, 2016, 15:55
I have built a loader using these resources:
http://files.hddguru.com/download/MRT/S ... M9868W.rarThe relevant components were found on tracks 23, 28, 38, and 39, and in modules ~001E.rpm and ~001D.rpm.
Note that MRT's "loader" is gibberish.
I have followed the structure described in the following article.
Building a Seagate F3 loader from official firmware update:
http://www.hddoracle.com/viewtopic.php?f=59&t=1468The only thing that puzzles me is the module type. I was expecting a module type of 0x4A (= overlay) but I found 0x0A instead.
The build time/date for the overlays is 14:25 Sept 18, 2009.
- Attachments
-
- ST3500418AS_CC38.rar
- (174.67 KiB) Downloaded 594 times
January 13th, 2016, 16:19
Thank you very much Mr. Frank.
November 17th, 2016, 4:57
HOW TO LOAD THIS FILE WITH TERMINAL ITS POSSIBLE ?????????????
https://www.facebook.com/Galaxy-Data-Re ... 230196828/
November 17th, 2016, 17:36
yes, it is. But not through ASCII diag mode.
November 18th, 2016, 2:11
pepe, do you know my friend how to load loader file with terminal please give hints __research
and thanks to reapliye my question
November 18th, 2016, 5:32
pm sent...
November 18th, 2016, 12:34
Hello Pepe
Can u send details to me also
pls
January 18th, 2018, 2:46
pepe,
Sir, can you send me detail, please!
January 19th, 2018, 17:08
fzabkar wrote:Use a ROM and loader from a different firmware version.
Transfer adaptives to foreign ROM.
Start drive with foreign ROM, foreign loader, native adaptives.
Retrieve SA modules and tracks.
Build native loader from native resources and reinstall native ROM.
Start drive with native ROM and native loader.
Well,
Great approach
January 21st, 2018, 10:50
Spildit,
i see, thanks!
Powered by phpBB © phpBB Group.