March 10th, 2016, 15:03
March 11th, 2016, 2:13
Spildit wrote:Ask for help to the person who sold you the auto trex ?
March 12th, 2016, 17:06
Spildit wrote:cdma-india wrote:just purchase auto trex from some sorce but big problem how to use it because i run arco test in 10 wd hard disk all goes fine software cut bad head auto after complete full process software say something like external power supply i dont know what was that and all 10 hard disk having bad sectors none of them 100% ok
what i am doing wrong ?
anything remain
i am very much new in this field
want some help
Do you have something like WDMarvel ?
I guess it should be easier to use for a starter.
Ideally you would get a PC-3000 because of the manuals and support but lacking that i guess you should start by simple jobs and move to the ones you don't understand/are more difficult later.
March 12th, 2016, 17:09
Spildit wrote:cdma-india wrote:just purchase auto trex from some sorce but big problem how to use it because i run arco test in 10 wd hard disk all goes fine software cut bad head auto after complete full process software say something like external power supply i dont know what was that and all 10 hard disk having bad sectors none of them 100% ok
what i am doing wrong ?
anything remain
i am very much new in this field
want some help
Do you have something like WDMarvel ?
I guess it should be easier to use for a starter.
Ideally you would get a PC-3000 because of the manuals and support but lacking that i guess you should start by simple jobs and move to the ones you don't understand/are more difficult later.
March 12th, 2016, 18:19
Spildit wrote:hpw333 wrote:
WDmarvel Vs trex will lose
all these tools is rip on TREX
and any tools without information is useless
i know m ost trex command , it's factory software
AUTO TREX "might" be good for ARCO and stuff like that but if all that you want to do is fix some bad modules or write ROM or use a slow fix a nice GUI like WDMarvel might be better for a starter.
Also MRT, PC-3000, HRT, ETC will have hardware assistence while TREX you will have to connect the drive to the motherboard and you might have issues with drives that are busy or responding slowly.
Also you can't clone/image with TREX.
But if you want to share a AUTO TREX please do so ...
Just don't ask $$$ for it as it's WD propriatary software ...
But if you want to share a AUTO TREX please do so ...
Just don't ask $$$ for it as it's WD propriatary software ...
March 13th, 2016, 0:52
Spildit wrote:Ok, no problem.
March 13th, 2016, 3:02
March 13th, 2016, 15:53
March 18th, 2016, 5:24
Amarbir[CDR-Labs] wrote:Spildit wrote:Ok, no problem.
Lol ,
Spildit i though he will give you at least
March 18th, 2016, 5:24
cdma-india wrote:plz close this thread all problem solve
March 18th, 2016, 5:25
Spildit wrote:That TREX was posted on the file section on 13 Feb 2014
http://files.hddguru.com/download/Software/
OP is talking about updated version + special scripts to run ARCO on automatic way.
May 28th, 2017, 15:43
cdma-india wrote:just purchase auto trex from some sorce but big problem how to use it because i run arco test in 10 wd hard disk all goes fine software cut bad head auto after complete full process software say something like external power supply i dont know what was that and all 10 hard disk having bad sectors none of them 100% ok
what i am doing wrong ?
anything remain
i am very much new in this field
want some help
May 28th, 2017, 15:46
Powered by phpBB © phpBB Group.