All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 7th, 2015, 6:37 
Offline

Joined: September 7th, 2012, 16:37
Posts: 178
Hello,

I try to replace a USB PCB 771737 by a SATA PCB according to http://ts.acelaboratory.com/index.php?/ ... usb-drives I can use either 701692 or 771692

When I see the USB PCB, I can see 2 ROM but the SATA PCB coes have only 1 ROM (see photos)



The USB PCB contain U8 & U12 chip but SATA PCB contain only U12 which is smaller than the U12 of the USB PCB (looks like the U8 chip).

Any solution to make teh replacement work please?

Thanks in advance.


Attachments:
771737-4.jpg
771737-4.jpg [ 264.93 KiB | Viewed 11440 times ]
SATA-771692.jpg
SATA-771692.jpg [ 397.96 KiB | Viewed 11440 times ]
Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 7th, 2015, 6:52 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
U8 contains the bridge firmware whereas U12 contains the HDD firmware. You only need to bother with U12.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 7th, 2015, 7:31 
Offline

Joined: September 7th, 2012, 16:37
Posts: 178
Thank you for your reply.

But if you see the USB and SATA PCB, U12 chip doesn't seem to be the same size!


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 7th, 2015, 10:07 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan
what is the problem with the disk ?
what tools you have ?

why bother soldering, you can simply read and write ROM content.

_________________
Data Recovery Pakistan


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 7th, 2015, 16:59 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
If you have access to PC-3000 you can read the ROM through terminal connection on the USB board, then write it to the SATA board.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 7th, 2015, 17:36 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
sosrecup wrote:
Thank you for your reply.

But if you see the USB and SATA PCB, U12 chip doesn't seem to be the same size!


They are the same size, well the pin specs are the same which is all you need to worry about, they are just different packages.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 8th, 2015, 2:21 
Offline

Joined: September 7th, 2012, 16:37
Posts: 178
Thank you very much guys for your help.

I'll try to solder the USB U12 chip directly to the SATA PCB, if it doesn't work, I'll try to read it with PC3000 or a ROM programmer.


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 8th, 2015, 3:33 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1387
Location: isreal
sosrecup wrote:
Thank you very much guys for your help.

I'll try to solder the USB U12 chip directly to the SATA PCB, if it doesn't work, I'll try to read it with PC3000 or a ROM programmer.

I don't get it
If you own (or have access to) those tools, y don't u use them in the first place ?
Why bother to unsolder and resolder.


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 8th, 2015, 12:20 
Offline

Joined: September 7th, 2012, 16:37
Posts: 178
Quote:
I don't get it
If you own (or have access to) those tools, y don't u use them in the first place ?
Why bother to unsolder and resolder.


I didn't new that we can read ROM with PC3000 for USB drives.


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 8th, 2015, 14:00 
Offline

Joined: March 20th, 2010, 4:34
Posts: 256
Location: Turkey
sosrecup wrote:
Quote:
I don't get it
If you own (or have access to) those tools, y don't u use them in the first place ?
Why bother to unsolder and resolder.


I didn't new that we can read ROM with PC3000 for USB drives.


do you own a legit pc3k or Chinese one ?

_________________
RAID/Server Recovery


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 9th, 2015, 13:10 
Offline

Joined: September 7th, 2012, 16:37
Posts: 178
Quote:
do you own a legit pc3k or Chinese one ?


SURE a legal version of PC3000


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 9th, 2015, 15:22 
Offline

Joined: March 20th, 2010, 4:34
Posts: 256
Location: Turkey
PM sent.

_________________
RAID/Server Recovery


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: April 9th, 2015, 16:18 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
Here's where you can learn how to do it: http://www.data-medics.com/forum/viewto ... f=21&t=745

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: March 5th, 2016, 9:41 
Offline

Joined: August 8th, 2007, 6:32
Posts: 1238
Location: inside ROM
Sorry accidentally replied to this line, How do i delete this?


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: March 16th, 2016, 4:56 
Offline

Joined: June 25th, 2006, 13:51
Posts: 137
Location: Italy
Hello
I resume this topic because I have a similar case with same USB board :-)

It is on a WD10TMVW-11ZSMS1 and the board is 771737-600

well I have its "donor" SATA board 771692

but reading the 771737-600 ROM I got it as size 512KB while the "donor" 771692 is 256KB

so writing is not obviously allowed

ok, moving the ROM is the solution, but have have you had the same experience?
And so, have you found some 771692 with ROM size 512KB?
If yes, which was it the donor drive model?

I ask that because I don't like to solder de-solder too many times the ROMs from the same board, because sooner or later some lane will detach.

Additionally, as you can see from the attachment, the ROM is the really annoying one to get de-solderd

Thank you


Attachments:
File comment: ROM Picture
ROM-02.jpg
ROM-02.jpg [ 74.51 KiB | Viewed 10633 times ]
Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: March 16th, 2016, 5:06 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Yes, some have 256Kb and some 512Kb.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: WD USB to SATA compatibility 2060-771737-001
PostPosted: March 16th, 2016, 5:13 
Offline

Joined: June 25th, 2006, 13:51
Posts: 137
Location: Italy
Don't you kindly have any reference for a SATA with 512KB?

Means on which model was it installed

The two I have are both from WD10TPVT and both are 256KB

Thank you


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: ddd123 and 76 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group