All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Hitachi IBM 7250A7 RAM Issue
PostPosted: March 25th, 2016, 14:36 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
Had a few of these in with the same issue and normally a pretty quick fix. However with this drive I cannot upload PSHT and RDMT into RAM. I keep getting an error saying the module is not found. Modules are not being read at all (ABR error), however I can see the RPSH, USAG and MFGP in RAM. NV-RAM issue? Any ideas.
Code:

Selected family......................... : 7250A7
Model by ID............................. :                                         

Techno mode key......................... : Ok

Error startintg command: Reading SA [0x3F0000004, 0x4]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0000004, 0x1]
Device error detected (ABR)
Error reading module USAG(0): Error startintg command: Reading SA [0x3F0000004, 0x1]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0100004, 0x4]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0100004, 0x1]
Device error detected (ABR)
Error reading module USAG(1): Error startintg command: Reading SA [0x3F0100004, 0x1]
Device error detected (ABR)
Loading modules table................................................. : Error
Error : .............................................................. : Module USAG: no copies read!
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command



Test  : HDD Translator initialization in RAM
PSHT: C:\Program Files (x86)\ACE Lab\PC-3000\!Profiles\HITACHI-IBM-ARM\7250A7\HGST HTS725032A7E630-GHBZB550-TF645BY11RX40N\Data\SABackup\Modules\~PSHT.rpm
RDMT: C:\Program Files (x86)\ACE Lab\PC-3000\!Profiles\HITACHI-IBM-ARM\7250A7\HGST HTS725032A7E630-GHBZB550-TF645BY11RX40N\Data\SABackup\Modules\~RDMT.rpm
Loading PSHT...
Module PSHT is not found!
Loading RDMT...
Module RDMT is not found!
Searching of Translator activation flag address...
Completed

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: March 26th, 2016, 4:30 
Offline

Joined: December 16th, 2015, 12:37
Posts: 94
Location: GCC
Hi ,

I am facing same problem .. heads is ok ... we believe that ..

any help ?

thanks


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: March 26th, 2016, 8:19 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
Have you tried uploading the PSHT or RDMT from a file instead of from SA?

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: March 26th, 2016, 9:11 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
data-medics wrote:
Have you tried uploading the PSHT or RDMT from a file instead of from SA?
Yes I have tried from the SA and from 4 different drives.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: March 26th, 2016, 9:58 
Offline

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/
That's either bad heads or SA damage or non-original PCB (less likely). Drive can't read the SA and that's the first issue to overcome.

Generally should be recoverable, but can be not straightforward.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: March 26th, 2016, 13:35 
Offline

Joined: December 16th, 2015, 12:37
Posts: 94
Location: GCC
data-medics, Dmitri,

Original PCB .. Heads replaced same problem >>
it's seem like SA damage

any one can help ?

thanks


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: January 22nd, 2017, 15:48 
Offline

Joined: February 18th, 2009, 8:08
Posts: 292
Location: Manchester, UK
I have a Hitachi in with the same symptoms, but 5475A9 series. USAG cannot be loaded. Using donor PCB or heads makes no difference. No unusual noises when drive is powered, heads sound smooth. I've seen a post on the AceLabs forum with an uncertain conclusion from tech support - that there is some media failure within the service area, but no way of testing because there is no alternative reading mode for Hitachi (e.g. kernel or hotswap).

Has anyone else come to a positive conclusion with one of these failures?

Best regards,
John

----

Selected family......................... : 5475A9
Model by ID............................. : <ID IS NOT READ>

Techno mode key......................... : Ok

Error startintg command: Reading SA [0x3F0000004, 0x4]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0000004, 0x1]
Device error detected (ABR)
Error reading module USAG(0): Error startintg command: Reading SA [0x3F0000004, 0x1]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0100004, 0x4]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0100004, 0x1]
Device error detected (ABR)
Error reading module USAG(1): Error startintg command: Reading SA [0x3F0100004, 0x1]
Device error detected (ABR)
Loading modules table................................................. : Error
Error : .............................................................. : Module USAG: no copies read!
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command
Module RDMT is not found!

---

_________________
CDR - Manchester Data Recovery Services
0161 408 4857
http://www.cheadledatarecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: January 23rd, 2017, 12:37 
Offline

Joined: October 5th, 2015, 18:53
Posts: 474
Location: US
Most likely drive has problems with reading system modules. You need to have ability to work with loader. I can help you - pm me.


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: January 23rd, 2017, 14:09 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3459
Location: CDRLabs @ Chandigarh [ India ]
drHDD wrote:
Most likely drive has problems with reading system modules. You need to have ability to work with loader. I can help you - pm me.


Wayne Man ,
You Are Theeee Expert In Hitachi ,I love Your Work In This I Have Seen Many Useful Posts From You in Regard To The Same Subject .To Confirm If Its a SA Read Issue Try Doing Same Thing in Same Family And Model Drive ,If That Works it Has To Be SA

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: January 23rd, 2017, 19:11 
Offline

Joined: October 5th, 2015, 18:53
Posts: 474
Location: US
whY firsT letteR oF eacH worD iS capitaL?


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: January 27th, 2017, 18:25 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4301
Location: Hungary
yeah, ovls are not loaded most probably...

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 9th, 2017, 12:35 
Offline

Joined: February 18th, 2009, 8:08
Posts: 292
Location: Manchester, UK
A couple of people took a look at this but could not get any where. Then Igor at D3 was able to get the HDD to ID with working translator. Disk has been read OK, but plenty of degraded areas as expected. Thanks D3 Consulting.

_________________
CDR - Manchester Data Recovery Services
0161 408 4857
http://www.cheadledatarecovery.co.uk/


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 9th, 2017, 17:00 
Offline

Joined: October 5th, 2015, 18:53
Posts: 474
Location: US
There is a way to work with degraded areas. It's possible to tune up head adaptives. It's actually not a degraded areas it is problem with heads and adaptives.


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 9th, 2017, 19:37 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4301
Location: Hungary
yeah, adaptives play a major role in the recovery of most recent drives...

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 9th, 2017, 20:13 
Offline

Joined: July 6th, 2013, 15:13
Posts: 310
Location: ISLAMABAD
Hi
Please Check NV-ram, if your drive is returned from other DR companies.
some times the Data Recovery companies change NV-RAM bytes. which makes SA access not possible.

some companies Edit NV-RAM and make User Sector in access able (Like Change NVRAM hex offset D7E and DE4 to value 01 instead of 00 on 5432 laptop model will make all user sectors in access able, and also the FW area, no utility will read FW). but you can access NV-RAM if you connect only the PCB.

We face this same issue in Kuwait, all time the WD drive come from other companies are not able to show sectors, before its working fine.

also there is a Way to boot from head copy 1, on Hitachi Drives.

in your case don't know what happened. but check NVRAM and ROM, Mostly ROM of ARM will be damaged. due to which no thing will be found, and utilities gives errors

Regards
Waqas Ali


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: April 25th, 2017, 8:34 
Online

Joined: March 4th, 2015, 8:52
Posts: 22
Location: Ethiopia
Hi Guys,

Have a similar case here. Have tried to load PSHT or RDMT from file, swap to donor PCB and change head map but the drive still does not ID. Does anybody have any ideas how to get the drive to ID right?

Thanks


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 2nd, 2018, 14:04 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
Got similar here. Heads ok, PCB native:

Selected family......................... : CUSTOM
Model by ID............................. : <ID IS NOT READ>



Unlock techno mode access
Techno mode key......................... : Ok
Tech Mode is not locked!
Techno mode key......................... : Ok

Error startintg command: Reading SA [0x3F0000004, 0x4]
Device error detected (ABR)
Error reading module USAG(0): Error startintg command: Reading SA [0x3F0000004, 0x1]
Device error detected (ABR)
Error startintg command: Reading SA [0x3F0100004, 0x4]
Device error detected (ABR)
Error reading module USAG(1): Error startintg command: Reading SA [0x3F0100004, 0x1]
Device error detected (ABR)
Loading modules table................................................. : Error
Error : .............................................................. : Module USAG: no copies read!
Loading the table of "open" modules................................... : Error
Error : .............................................................. : Error executing loading "open" modules dir command
Unsupported action (GetFW1ID) for NVR kind 0


Any tips or solution for USAG available since last post in this topic? Drive comes DRD in 3-4seconds, no ID except FW.

_________________
odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 3rd, 2018, 0:43 
Offline

Joined: October 5th, 2015, 18:53
Posts: 474
Location: US
Most likely broken system modules. You need to start drive from loader and find out what is broken and etc.


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 4th, 2018, 9:48 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1387
Location: isreal
can be bad head(s)
try to read from the other copy (disable H0)


Top
 Profile  
 
 Post subject: Re: Hitachi IBM 7250A7 RAM Issue
PostPosted: February 4th, 2018, 10:00 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 258
Location: Poland
Heads are fine, tried to read both copies, no luck.

_________________
odzyskiwanie danych


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google Adsense [Bot] and 90 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group