All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: ST250DM000 led BSY all time<==successfully recovery share
PostPosted: July 9th, 2016, 0:27 
Offline
User avatar

Joined: September 16th, 2006, 8:51
Posts: 141
Location: Vietnam
Hi all,
I want to share my hardly case with you.
Seagate ST250DM00-1BD141; Firmware: KC48
Led BSY all time. Can't get F3> with Ctr+Z
Rst 0x10M
MC Internal LPC Process
...
...
(P) SATA Reset
Then hang on.
After trying to do swap ROM, do short read channel 3-6 times with no luck.
Then turn power on - wait for 1-2 second then do short channel==>something change
Rst 0x10M
MC Internal LPC Progress
Spin Up
(DOS) Table Read Fail
DOS: MAGIC CONFIG NUMBER MISMATCH
...
...
Power off then on + wait for 5-6 minutes==>get led DRD and DSC :D
All data back to customer with 100% good quality.

_________________
* Có ba thứ ngu dốt :

Không hiểu biết những gì mình đáng biết.
Hiểu biết không rành những gì mình biết.
Hiểu biết những gì mình không cần biết.


Top
 Profile  
 
 Post subject: Re: ST250DM000 led BSY all time<==successfully recovery shar
PostPosted: July 9th, 2016, 5:25 
Offline
User avatar

Joined: December 29th, 2011, 2:11
Posts: 190
Location: egypt
this is long bsy problem
and if you need to apply solution after you login terminal you should clear DOS Table
/7m100

_________________
http://www.hpwlab.com


Top
 Profile  
 
 Post subject: Re: ST250DM000 led BSY all time<==successfully recovery shar
PostPosted: July 19th, 2016, 0:35 
Offline
User avatar

Joined: June 26th, 2014, 5:08
Posts: 135
Location: China
I agree. It must be long bsy problem. If power off and power on, the problem still exists. If you want to solve it completely, you can conduct m100 under level 7. I hope it can help.

_________________
MRT Express & Ultra, Professional Data Recovery Tool
Email & Skype: sales@mrtlab.com
Whatsup: +8615827155998


Top
 Profile  
 
 Post subject: Re: ST500DM000 led BSY all time
PostPosted: December 6th, 2018, 19:59 
Offline

Joined: July 9th, 2016, 11:31
Posts: 13
Location: Moscow
[quote="hddlab"]Hi all,
I want to share my hardly case with you.
Seagate ST500DM02; fw kc66
Led BSY all time. Can't get F3> with Ctr+Z
Rst 0x10M
MC Internal LPC Process
hdd stays bsy forever

Well could someone gimme a piece of advice which pins are needed to short to get finaly into F3> ?
PCB100535704 rev D
Tks in advance !


Top
 Profile  
 
 Post subject: Re: ST500DM000 led BSY all time
PostPosted: December 7th, 2018, 6:44 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan
roger9 wrote:
hddlab wrote:
Hi all,
I want to share my hardly case with you.
Seagate ST500DM02; fw kc66
Led BSY all time. Can't get F3> with Ctr+Z
Rst 0x10M
MC Internal LPC Process
hdd stays bsy forever

Well could someone gimme a piece of advice which pins are needed to short to get finaly into F3> ?
PCB100535704 rev D
Tks in advance !


you must start a new thread, however these should be the points.


Attachments:
IMG-20181201-WA0008.jpg
IMG-20181201-WA0008.jpg [ 189.86 KiB | Viewed 4870 times ]

_________________
Data Recovery Pakistan
Top
 Profile  
 
 Post subject: Re: ST250DM000 led BSY all time<==successfully recovery shar
PostPosted: December 7th, 2018, 15:48 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
Tip: How to identify the Read Channel test points:
http://www.hddoracle.com/viewtopic.php?f=24&t=123

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google Adsense [Bot] and 59 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group