WDC_WD5000AAKX-75U6AA0
The hdd responding very slow to make partition in windows or windows installation

Probably slow responding problem. Can be solved with hddsupertool, but them you have to see if there are other problems around. You can check SMART and see what it says. Is your intention recover your data or re use your hdd?

Best!

F

just testing drive practice
in bios SMART enabled no error there

you can use CristalDiskInfo to check SMART parameters and see if there are some on them close to threshold.

HERE CRISTALDISK INFO

I think you have an issue with rellocated sector count. Use hddsupertool to do a slow fix (you can seacrh in this forum for procedure) and then mhdd to check sectors.

Best!

F

If you need to recover data from the drive then you should use HDDSuperTool to apply the slow fix, and then HDDSuperClone to clone/image the drive. The drive has many bad sectors, maybe even a weak head. If you wish to try to reuse it, you can follow Spildit's information, but you will never be able to trust the drive, and it will likely not last long.

_________________
http://www.hddsuperclone.com
Home of HDDSuperClone

Respectable maximus and spildit sirs,

Just I'm doing practice to keep this drive for feahtture use for data recovery by using heads and PCB

Then you should perform the slow fix using HDDSuperTool, and then do a clone using HDDSuperClone with the destination set to /dev/null. The data will not be copied anywhere as it is not needed, but this will allow the progress log to be built, and you can use HDDSCViewer to get a visual representation of the defects. This can tell you if there are just some bad areas, or if there is a weak head. If a head is weak then the heads may not be a good choice for a donor.

_________________
http://www.hddsuperclone.com
Home of HDDSuperClone

Sirrrrrrr,
This drive already has a good PCB ,You can test the heads with a good tool and if they are ok forget about slow fix and use heads the days you wanna use them

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

prasadsv, YOU HAVE ANY TOOLS IF YES I CAN HELP YOU IF NOT ONLY PRAYER



https://www.facebook.com/Galaxy-Data-Re ... 230196828/

Sir, Spildit
I get these drives from CPU who intended to replace HDD and who do not need data, collecting these drives Just curious to what happen in those HDD to know I am posting Topics here.
I appreciate your replies
Thanking sir

Spildit, MY DEAR FRIEND


I ALREADY PM MSG TO prasadsv,
If he asks for help from me I will help

Well,
I Wanna Ask You ,He Wants To Practise So That He Can Use The Drive Like Heads , PCB Later On ,My Point Was And Is Again Why does he need to bother its already good ? . Applying slow fix and Doing The Longgggggggggg............... Longggggggg....... procedures will not make his pcb and heads better will they ?.I have said it earlier and i will say it now again ,If people are interested in doing and starting DR they should invest in tools

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

I KNOW MY FRIEND BUT OP JUST STARTED IN THIS FIELD SO .......
I like to help people feel better
BECAUSE
Man is man's work





MY ENGLISH IS NOT GOOD

presently My concentration on basic Tools like hsa replacement and platter replace ment tools
and we are studying above Tools designing