All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 59 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 7:55 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Hi,

The HDD came with problematic ROM.

Can read ROM,
Can read all modules of ROM Except "47"
The Head Map shows Wrong

I've been able to read TRACKS from SA with a loader+donor rom, tried to regenerate ROM, it produced following 4 modules - [0B 0D 4F 30], also ROM.

47 and 0A still can't be produced.

WD20NMVW-11AV3S2
PCB: 1961 - Converted to SATA 1959

Any assistance would be highly appreciated

Patient & Regenerated ROM is attached


Attachments:
File comment: Regenerated
Rebuild.rar [236.04 KiB]
Downloaded 422 times
File comment: Original Patient
ROM.rar [237.24 KiB]
Downloaded 429 times

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 8:52 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan
if rebuild is not working, what about checking ROM ver from SA tracks and ask here or try to find it from other sources.
just a thought.

_________________
Data Recovery Pakistan


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 15:51 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
I used DONOR ROM + LDR to gain SA Access and was able to Read Tracks. also, I've extracted Modules from Tracks.

I used different combination of ROM+LDR while I got access there.

I've attached the modules 102-109 [107 doesn't exist]


Attachments:
New folder.zip [248.7 KiB]
Downloaded 403 times

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 15:57 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Yes, the test confirms the issue with ROM and 47 as reported in the first run.

The attached modules 102-106 have no contents, those are blank, only 108 and 109 contains info

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 16:10 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Thanks for your assistance, I'll update you once I get any findings

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 16:20 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Yes, as customer confirmed it is untouched, and also it looks like untouched to me. I'll discuss again with the customer.

What can be done with WDR on 47?

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 16:32 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15569
Location: Australia
@shahij, there is nothing wrong with the patient ROM. The problem is that your tool doesn't understand that it should be using the directory in module 20B rather than 0B.

See your thread at the HDD Oracle.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 16:47 
Offline

Joined: October 5th, 2015, 18:53
Posts: 483
Location: US
forty seven


Attachments:
47.rar [746 Bytes]
Downloaded 388 times
Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 16:54 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
No, there is not abnormal noise, it spins smooth without any issue.

The HDD came up as no ID, converted to SATA and in Kernel Mode it showed
Heads number : .................................: 0
Heads number in use : ..........................: 0
heads map : ....................................: [Blank]

Tried to Backup ROM and ROM Modules and found 47 is inaccessible and couldn't backup.

Then used DONOR ROM +LDR to gain access to SA, failed. Then modified DIR starting address, and was able to gain access to SA, and also was able to read Tracks.

That's all.

I've also checked another SHREK LT HDD and found everything is accessible by the tool in use "MRT"

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 17:02 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Thanks drHDD for the generated 47. I've just rewrote all original ROM, It's modules and the 47 by drHDD. now the drive comes Ready immediately but get busy once tried to access in Utility.

Will edit dir to get access and will update here

@spildit, no, all Tracks were read smooth without any issue!

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 17:10 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Strange thing is that - now the new generated 47 is reporting ERROR at the first time it did!!!

Image

Follwing pics represents existing condition with original ROM/modules as exactly while received the HDD

Image

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 17:16 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Spildit wrote:
What do you mean by changing DIR starting address ?

If you use non-native ROM + Loader and you can't get to SA you can try to edit dir in RAM and load dir from file to RAM. Then check SA. Make sure you have correct regions for SA set on RAM as well.


I mean ABA starting address in ROM

Spildit wrote:
If you have access to SA then patch module 02 for the "slow issue" and write it back to the drive. Try with the native ROM now. Does it change anything ? Still no ID ? Did you check module 02 as well ?


Fixed the 0A issue by editing HEAD MAP in ROM

Preparing to get access to SA now

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 17:45 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
I've been able to access SA with original ROM, though it's reporting 47 error.

I changed the Head Map on 0A.

Accessed to SA with original ROM + Original Loader

Here is the module 02 attached

Attachment:
02.zip [1.2 KiB]
Downloaded 269 times

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 18:16 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
The case Is solved. Rom Is fine. 0A mod were Bad. Its fixed by editing the Head map. The traditional process of patching 02 didnt work. It keeps the drive busy once tried to Access.
Donor 02 helped to solved. Ill expect the original 02 to be patched.

Ive a same model HDD. Ive checked and found 47 Is ok on This one by the same tool. The tool Is not issue.

After writing the mod02 from donor, data area accessible as well as 47 reports fine.

I also tested the 0A, its reporting the same before fixing and after fixing the hdd.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 18:21 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Im in phone now, not in pc. I didnt use the slow issue fix button on the tool. Tried to patch 02 in hex. It didnt work. Used donor 02 to get quick Access and it worked. See the above 02 n patch it. Let me wrire it to check

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 18:23 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Oh, i see u have already patched 02. Will test tomorrow. Thanks for all the thongs

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 21st, 2016, 19:41 
Offline

Joined: January 29th, 2012, 1:43
Posts: 982
Location: United States
Spildit wrote:
If your original 02 is locked/edited my patch will not help you at all as it will only solve the slow issue or stop to read LBA when some sectors are hit. If you post your good module 02 i will patch it for the slow fix and you should be good to go even with original USB PCB.

@Spildit, here is the possible lock in mod 02:
Code:
Data record #32:
79d: 00 00 00 00 00 00 01 .......

Try changing the 01 to 00 and re-post the patched mod 02 so the op can see if that unlocks it.

_________________
http://www.hddsuperclone.com
Home of HDDSuperClone


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 22nd, 2016, 2:40 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Spildit wrote:
The new generated 47 ? The posted 47 module was extracted from your original rom.bin file !!! No need to regen anything it's good as it is.

I would attempt to patch the head map module on ROM with a known good copy from a drive of the exact same family and model and with the same head configuration. Either that or set the head map with MRT exactly the same as the working donor.

Maybe someone else messed the ROM with some sort of firmware tool ?

Maybe you did some tests and those changed ROM to block SA access or test for bad heads ?

If you enable the heads to the correct configuration in ROM and you power off/on does the drive regain access to SA ?


I have edited the Head Map in ROM instead of using DONOR, it worked.

No, no one touched the case, I've confirmed with customer. It's gone bad while it was connected to PC.

No, I tested things, but with keeping original backup. And the issues were found while I received the case. As the Head Map info was showing bad as well as 47 was reporting error, That's why suspected ROM issue.

Spildit wrote:
Reported error on 47 might be MRT bug.

Can you post donor ROM as well ? With donor ROM do you get the same 47 error ?


No, this is not MRT bug, I've confirmed by testing one of my another HDD from same family and same model.

Yes, I can post DONOR ROM.

DONOR ROM and 02 Is attached
Spildit wrote:
Ok .... Can you please upload donor 02 and donor ROM so i can compare ?

My guess is that someone messed those modules then. There is no way for the 0A to be "damaged" and still get the correct checksum. So .... Someone used FW tools on the drive and edited 0A on ROM and 02 on platter.


I've reconfirmed with the customer, he is from my good source, nothing was done to the HDD.


Attachments:
File comment: DONOR 02
02.rar [1.16 KiB]
Downloaded 325 times
File comment: DONOR ROM
ROM.rar [238.14 KiB]
Downloaded 315 times

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 22nd, 2016, 4:59 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
New problem arised.. The issue was fixed by DONOR Module

For test, I modified the Original 02, and wrote back again, and from then, I can't gain access to SA by any method.

Tried different condition of ROM+LDR, but can't access!

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: WD20NMVW-11AV3S2 ROM REGEN
PostPosted: December 22nd, 2016, 6:42 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Your patched Version 02 worked!

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 59 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group