Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
February 16th, 2017, 23:17
I am trying to convert a samsung USB drive I have to Sata so that I can use it in my deepspar. The USB drive I have can be seen here
http://www.ebay.com/itm/USB-3-0-HDD-PCB ... 2424851429?
The board I was thinking of using was
http://www.ebay.com/itm/TOSHIBA-HDD-PCB ... 2424851429I understand I have to match the MCU and motorchip and transfer ic602 from source board. I believe I matched things up correctly but just looking for confirmation.
Also I wanted to say that this is my first post here, I have read many threads in the past but recently have really dived into professional data recovery. Thanks for your help and I look forward to the community you all provide here.
Cheers!
February 17th, 2017, 12:50
Should work.
February 17th, 2017, 14:50
Okay, I ordered it. Thanks for your help.
February 18th, 2017, 23:55
Hi,
Will work if Main MCU and Motor controller are same
February 19th, 2017, 15:36
Just make sure you move the right IC
Do you not have DDI USB?
Powered by phpBB © phpBB Group.