Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
March 16th, 2017, 9:36
Hello!
the drive in topic shows all sectors ABRT.
heads, modules are OK and PCB changed with no luck.
Any suggestions ?
Thanks in advance.
March 16th, 2017, 13:17
If you have a professional tool like PC-3000 try running a heads test. It could be that one of the heads has failed and will need to be disabled. Even if a head is just unable to write it may act like that.
March 16th, 2017, 14:01
Thanks for replying.
I have tested the heads with MRT and it said it's OK.
Maybe replacing the heads will short the problem if it head/s or something else.
Thank you.
March 16th, 2017, 14:45
write/edit anything like: 00 to any of the modules, refresh and see/ power off/on see if the value remains same or modified as acted!
March 16th, 2017, 22:17
Tested and write succeed.
Thanks for reply.
March 17th, 2017, 4:54
Try changing the head map in RAM to "0000" and soft reset, see if you can read sector 0
March 17th, 2017, 17:44
Thank you Mr. Sean. I will try this at the office tomorrow and post the results.
March 20th, 2017, 9:26
pcimage wrote:Try changing the head map in RAM to "0000" and soft reset, see if you can read sector 0
Unfortunately, no luck.
Any suggestions ?
Thanks in advance.
March 22nd, 2017, 4:22
encounter the same situation,
and translator regeneration doesn't work
March 22nd, 2017, 23:56
had successfully recoveryed.
Some Modules were bad,rewrite them with identical version.
webyu wrote:encounter the same situation,
and translator regeneration doesn't work
Powered by phpBB © phpBB Group.