Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 13th, 2017, 16:14
Hello
I have disk WD20PURX with damaged PCB. So PCB was cut with something sharp and many tracks are damaged. Number PCB is 2060 771945-002 rev A.Because at the moment I don't have the same PCB is it possible using another PCB? Could help me what PCB I can use? I attached some photos disk and PCB.
thanks
- Attachments
-
-
-
April 13th, 2017, 16:25
Easy! Just get PCB with same P/N and switch U12 chip.
April 13th, 2017, 16:28
Yes, but I don't have another PCB 2060 771945-002 rev A!
April 13th, 2017, 17:14
771945 is really a very common PCB, its been used on a wide variety of drives
Powered by phpBB © phpBB Group.