All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Problem regenerating translator
PostPosted: May 11th, 2017, 20:48 
Offline
User avatar

Joined: May 5th, 2017, 17:35
Posts: 26
Location: Santiago de Cuba
when i put m0,6,3,,,,,22

i get this

Rst 0x08M
ASCII Diag
No HOST FIS-ReadyStatusFlags 2002A185mode

F3 T>

F3 T>m0,6,3,,,,,22

DiagError 0000500E Process Defect List Error
R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, List Index 0025617
7, File Error 000000D0

F3 T>

why? and what can i do?


Top
 Profile  
 
 Post subject: Re: Problem regenerating translator
PostPosted: May 12th, 2017, 4:36 
Offline

Joined: May 11th, 2017, 17:10
Posts: 25
Location: Iran - Hamedan
Solution:
Read SYSTEM file 1B via terminal, remove all defects which has sign C, sign C = G to P transfer.
After that save it and write this system file again via terminal.
power reset
regenerate translator.

Done.

Regards


Top
 Profile  
 
 Post subject: Re: Problem regenerating translator
PostPosted: May 12th, 2017, 13:11 
Offline
User avatar

Joined: May 5th, 2017, 17:35
Posts: 26
Location: Santiago de Cuba
mmzhr wrote:
Solution:
Read SYSTEM file 1B via terminal, remove all defects which has sign C, sign C = G to P transfer.
After that save it and write this system file again via terminal.
power reset
regenerate translator.

Done.

Regards

Thanks, but: How can i do that in commands?

F3 T>?????What??


Top
 Profile  
 
 Post subject: Re: Problem regenerating translator
PostPosted: May 12th, 2017, 13:18 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 7795
Location: Portugal
It's the same F3 arch drive that is clicking ???

No HOST FIS-ReadyStatusFlags - Translator is gone.

Process Defect List Error - Defect list is gone.


Also ....

If you use m0,6,3,,,,,22 G-List entries will be moved to Non-Resident G and you will end up with partial access problem if you have a F3 arch drive and then you will need something like PC-3000 "fork" method to fix (plus several days of waiting) and you are even more fuc*** up then you were before playing blindly with terminal commands ....

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Problem regenerating translator
PostPosted: May 12th, 2017, 14:22 
Offline
User avatar

Joined: May 5th, 2017, 17:35
Posts: 26
Location: Santiago de Cuba
Spildit wrote:
It's the same F3 arch drive that is clicking ???

No HOST FIS-ReadyStatusFlags - Translator is gone.

Process Defect List Error - Defect list is gone.


Also ....

If you use m0,6,3,,,,,22 G-List entries will be moved to Non-Resident G and you will end up with partial access problem if you have a F3 arch drive and then you will need something like PC-3000 "fork" method to fix (plus several days of waiting) and you are even more fuc*** up then you were before playing blindly with terminal commands ....

ImageWhy Spildit why?
lol, this is another drive, i buyed it long time ago in 5$dollars, because the old owner have read in a program, HDD sentinel, his drive have 0 days live left :lol: . I used it during almost a year, until it broke in my brother computer. i´m triyng to fix it with my RS232 Tool.


Top
 Profile  
 
 Post subject: Re: Problem regenerating translator
PostPosted: May 12th, 2017, 14:45 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 7795
Location: Portugal
Why did you use this ? - m0,6,3,,,,,22 ???

:shock: :shock: :shock:

Start by :

- Tell us the FULL MODEL OF THE DRIVE.

- Tell us if the drive click.

If you have TTL adaptor POST A TERMINAL LOG. Power on the drive with terminal opened and copy/paste log here.

But of course i will tell you the good news first !!! You will not be able to fix it so go and buy another $5 one :twisted: :twisted: :twisted:

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Problem regenerating translator
PostPosted: May 12th, 2017, 15:41 
Offline
User avatar

Joined: May 5th, 2017, 17:35
Posts: 26
Location: Santiago de Cuba
Spildit wrote:
Why did you use this ? - m0,6,3,,,,,22 ???

:shock: :shock: :shock:

Start by :

- Tell us the FULL MODEL OF THE DRIVE.

- Tell us if the drive click.

If you have TTL adaptor POST A TERMINAL LOG. Power on the drive with terminal opened and copy/paste log here.

But of course i will tell you the good news first !!! You will not be able to fix it so go and buy another $5 one :twisted: :twisted: :twisted:

i'm at my work right now, when i get home i will tell you


Top
 Profile  
 
 Post subject: Re: Problem regenerating translator
PostPosted: May 12th, 2017, 16:16 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 7795
Location: Portugal
Ok....

See you later then...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot], Yahoo [Bot] and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group