Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
May 15th, 2017, 10:44
Hi!
I have SP0411N hdd. The disk running Multiword DMA 2 mode. But, (according the specifications) disk supports up to Ultra DMA mod 6(133 MB/s). And i'm using 80 line cable. I have Tried remove and reinstall IDE ATA ATAPI controller driver, tried connecting middle connector at the cable, and cleared bios.
I haven't tried update the discs FW. Does FW update solve the problem?
How to solve the problem?
May 15th, 2017, 21:49
Firmware updates on hard drive NEVER resolves a problem with a non-working drive. Never. Firmware updates are only for preventive planning, NOT for when the drive has already failed.
May 16th, 2017, 0:23
What does CrystalDiskInfo report?
May 16th, 2017, 1:23
Max write/read speed approx. 12 MBps.
Powered by phpBB © phpBB Group.