Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
Moltke
 Post subject: Re: Hitachi ATA password
PostPosted: June 3rd, 2017, 18:02 
Offline

Joined: October 24th, 2005, 17:04
Posts: 242
helpless wrote:
How this happens? When zu tells you "POWER OFF / ON AND EXECUTE ZU AGAIN" you re-power your drive with the PCB on, run the same command, but instead of "UNLOCK DONE" it tells you the same "POWER OFF / ON AND EXECUTE ZU AGAIN" message again.


All is true. It should be :shock:
Edits to nvram. A message ("POWER OFF / ON AND EXECUTE ZU AGAIN") is displayed. Need a restart
Spin up, calculates S/ON (and does not work on tables),edit security, edit nvram.
Again displays a message and again needs to restart.
In 2013 I did not know how to perform a restart drive without turning off the power of the drive

Quote:
Is there any progress on it?

no. I will do when there is a desire and time.

What version do you use?

Quote:
And it was not the first time zu did this - I have a bunch of Hitachi drives that zu has made a paperweight of.

Just do not use it.
Top
 Profile  
 
Moltke
 Post subject: Re: Hitachi ATA password
PostPosted: June 3rd, 2017, 19:43 
Offline

Joined: October 24th, 2005, 17:04
Posts: 242
helpless
L9 on the table was not found, here is the log for K9
Code:
      Model: Hitachi HTS542525K9SA00             
Firmware: BBFOC39P                           
   Serial: 080705BB3F00WDJP34BG               
Disk size: 488397168 LBAs             238475 Mb
      CHS: 16383/16/63                8063 Mb 
    SMART: Enabled, Errlog, Selftest           
    CACHE: 7229k; L/A=ON; Wr=ON;      ok       
  Support: LBA, HPA, AAM, APM, DLM, DMAUDMA-6   
  AAM val: 254                        Maximum 
  APM val: 128                        Minimum 
    Erase: ~106 minutes                       
Security: ON, Max, Locked                                              <------------       
    ATA-8: SATA1, NCQ, PEC, SCT, WrUnk         



c:\_dumps>zu /a

BBFOC39PHitachi HTS542525K9SA00
NOT SUPPORTED
c:\_dumps>zu /a.

HDD=HGST/IBM
POWER OFF/ON AND EXECUTE ZU AGAIN
c:\_dumps>zu /a.

HDD=HGST/IBM
POWER OFF/ON
UNLOCK DONE
c:\_dumps>zu /a

BBFOC39PHitachi HTS542525K9SA00
NO PWD.BYE!
c:\_dumps>
Top
 Profile  
 
helpless
 Post subject: Re: Hitachi ATA password
PostPosted: June 4th, 2017, 7:35 
Offline

Joined: February 26th, 2013, 6:58
Posts: 210
Location: Hungary
Moltke wrote:
What version do you use?
August 2, 2013. Is there a newer version out?
Moltke wrote:
A message ("POWER OFF / ON AND EXECUTE ZU AGAIN") is displayed. Need a restart
Spin up, calculates S/ON (and does not work on tables),edit security, edit nvram.
Again displays a message and again needs to restart.
You need to restart twice and after each restart execute zu?
Does it make any difference if the model number ends with L9SA60 or L9SA00 ?

_________________
Those who know don’t talk. Those who talk don’t know.
Top
 Profile  
 
riroma8590
 Post subject: Re: Hitachi ATA password
PostPosted: May 25th, 2020, 12:40 
Offline

Joined: May 25th, 2020, 12:34
Posts: 5
Location: lion si kida
Hi everyone,

Is Moltke still around ? I want to report dat Zu_beta_fix_2013 is also not working with HTS7250505A7E630.

if I do zu /p. it says IBM/ARM not supported.

if I do zo /p8 it says : Model HTS7250505A7E630 is not supported.
Top
 Profile  
 
riroma8590
 Post subject: Re: Hitachi ATA password
PostPosted: May 26th, 2020, 5:06 
Offline

Joined: May 25th, 2020, 12:34
Posts: 5
Location: lion si kida
HTS7250505A7E630 should be HTS725050A7E630.
Top
 Profile  
 
riroma8590
 Post subject: Re: Hitachi ATA password
PostPosted: May 26th, 2020, 6:10 
Offline

Joined: May 25th, 2020, 12:34
Posts: 5
Location: lion si kida
maybe offtopic but still good to know: Is Moltke still active, I read on some forums that he was banned/left by him self. And in some older posts there is Mr Zhong, that he was an expert on Zu. And he was banned. What is the story ? and contacting whom would give higher chance of an answer ?
Top
 Profile  
 
Tomset
 Post subject: Re: Hitachi ATA password
PostPosted: May 26th, 2020, 6:20 
Offline

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow
Eugene names change like gloves. )
now he is - tametung
http://forum.ru-board.com/topic.cgi?for ... tart=600#6
Top
 Profile  
 
riroma8590
 Post subject: Re: Hitachi ATA password
PostPosted: May 26th, 2020, 7:25 
Offline

Joined: May 25th, 2020, 12:34
Posts: 5
Location: lion si kida
ok, thanks. I ll see if can find some info there.
Top
 Profile  
 
TradeLabelSoftware
 Post subject: Re: Hitachi ATA password
PostPosted: January 17th, 2023, 5:49 
Offline
User avatar

Joined: January 14th, 2023, 0:46
Posts: 1
Location: Delhi, India
my Hitachi HDD is also locked so please can anyone provide me a better solution to how unlocked my Hitachi HDD and i get my old data.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google Adsense [Bot] and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group