Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
May 31st, 2017, 10:14
Hi
For hdd repairing you must set derp setting to maximum for best defect error recovery
in level 2 type
Y1,ffff,ffff,ff,1
Y1 = Max Full Recovery
ffff = Max Read Retries
ffff = Max Write Retries
ff = Max ECC Level
1 = Enable Maximum ECC
then use m0 commands
Powered by phpBB © phpBB Group.