All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: No Terminal Responce
PostPosted: June 30th, 2017, 7:01 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
Model ST3500413As
fw jc45
PNO 9YP142-516
This drive is dead PCB(5.v TVS diode Short ) Changed PCB and changed eprom
Now Hdd detects Model No:ST_M13FQBL
Heads changed in clean room
PCB and Heads from same model, same FW , date code 45 days difference
Drive connected to Terminal
No terminal response Blank terminal
I am Using 5v adapter (not USB)


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: June 30th, 2017, 7:45 
Offline

Joined: November 26th, 2014, 11:55
Posts: 78
Location: Earth
if model number appears as ST_M13FQBL. it means SA can not read and ID values load from ROM. It can be a complicated problem maybe media damage.


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 1st, 2017, 4:13 
Offline

Joined: October 24th, 2014, 4:57
Posts: 219
Location: Remote Raid Help on planet Earth
prasadsv wrote:
... Changed PCB and changed eprom
...


Is ROM original or you change it for donor ROM?

_________________
http://www.alfadatarecovery.com


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 1st, 2017, 5:54 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
Martin wrote:
prasadsv wrote:
... Changed PCB and changed eprom
...


Is ROM original or you change it for donor ROM?


Original Rom swap


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 1st, 2017, 6:16 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
prasadsv wrote:
Martin wrote:
prasadsv wrote:
... Changed PCB and changed eprom
...


Is ROM original or you change it for donor ROM?


Original Rom swap

I mean Original ROM to new PCB


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 1st, 2017, 6:18 
Offline

Joined: October 24th, 2014, 4:57
Posts: 219
Location: Remote Raid Help on planet Earth
If drive are not clicking so upload overlay.

_________________
http://www.alfadatarecovery.com


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 1st, 2017, 6:37 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
Martin wrote:
If drive are not clicking so upload overlay.


Just I observed Clicking Very very low sound 4 to 5 times and becomes normal spin


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 1st, 2017, 7:46 
Offline

Joined: October 24th, 2014, 4:57
Posts: 219
Location: Remote Raid Help on planet Earth
Heads are good, but drive can't load important elements from SA, overlays usually. So upload overlay.

_________________
http://www.alfadatarecovery.com


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 7th, 2017, 8:58 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
Martin wrote:
Heads are good, but drive can't load important elements from SA, overlays usually. So upload overlay.

So upload overlay.?


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 7th, 2017, 10:28 
Offline

Joined: October 24th, 2014, 4:57
Posts: 219
Location: Remote Raid Help on planet Earth
prasadsv wrote:
Martin wrote:
Heads are good, but drive can't load important elements from SA, overlays usually. So upload overlay.

So upload overlay.?


Any issue with this sentence?

_________________
http://www.alfadatarecovery.com


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 9th, 2017, 14:41 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
May be The drive Family have problem. Other working drive of this same Family also no terminal output . I checked 3 hdd


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 16th, 2017, 6:20 
Offline

Joined: February 26th, 2013, 6:58
Posts: 210
Location: Hungary
ST3500413AS JC65 9YP142-542, same family, newer fw. and p/n.
Normal terminal output.

Rst 0x10M
RW: Disc Ctlr Initialization Completed.
(P) SATA Reset

ASCII Diag mode

F3 T>

_________________
Those who know don’t talk. Those who talk don’t know.


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 16th, 2017, 15:22 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
helpless wrote:
ST3500413AS JC65 9YP142-542, same family, newer fw. and p/n.
Normal terminal output.

Rst 0x10M
RW: Disc Ctlr Initialization Completed.
(P) SATA Reset

ASCII Diag mode

F3 T>

what adapter did you used?
I used Max232
I think issue with adapter(5v)


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 16th, 2017, 20:21 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Use a 3.3V adapter.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 17th, 2017, 0:46 
Offline

Joined: May 29th, 2011, 8:47
Posts: 131
Location: Russia
On this fw version terminal will appear as soon as DiskFW will be loaded.


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 17th, 2017, 5:13 
Offline

Joined: February 26th, 2013, 6:58
Posts: 210
Location: Hungary
prasadsv wrote:
what adapter did you used?
I used Max232
I think issue with adapter(5v)

max232a (connected to profilic usb to com adapter)

_________________
Those who know don’t talk. Those who talk don’t know.


Top
 Profile  
 
 Post subject: Re: No Terminal Responce
PostPosted: July 17th, 2017, 12:14 
Offline

Joined: February 22nd, 2016, 6:39
Posts: 114
Location: india
fzabkar wrote:
Use a 3.3V adapter.


It need 1.8v or 2.4 v? on both tx rx ports?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: elektek, napalm_atx and 51 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group