All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Looking for WD USB/SATA Bridge
PostPosted: July 2nd, 2017, 15:58 
Offline

Joined: July 2nd, 2017, 15:52
Posts: 2
Location: Georgia, USA
I have a WD Mybook Essential external drive with a bad USB/SATA bridge - part number 4061-705089-001 Rev 07P. This drive was from a few years back. Unfortunately, I didn't know WD did automatic hardware encryption on this drive, otherwise I would have gotten rid of that as soon as I found out.

I've tried the whole lot of data recovery software with no luck.

So, now I'm stuck looking for an exact copy of the above part number to try and salvage the data.

Anyone have one they no longer use that they'd be willing to part with?

Thanks in advance!


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 2nd, 2017, 18:52 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15529
Location: Australia
Upload a photo of your PCB. Sometimes there is a simple DIY fix.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 3rd, 2017, 4:21 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
khans011 wrote:
I have a WD Mybook Essential external drive with a bad USB/SATA bridge - part number 4061-705089-001 Rev 07P. This drive was from a few years back. Unfortunately, I didn't know WD did automatic hardware encryption on this drive, otherwise I would have gotten rid of that as soon as I found out.

I've tried the whole lot of data recovery software with no luck.

So, now I'm stuck looking for an exact copy of the above part number to try and salvage the data.

Anyone have one they no longer use that they'd be willing to part with?

Thanks in advance!


you don`t need it

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 3rd, 2017, 8:41 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
einstein9 wrote:
you don`t need it

I think he does need it, at least in North America. Perhaps you are thinking "Elements" when you read "Essentials."

_________________
Sabo Computer Repairs & Data Recovery


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 3rd, 2017, 9:02 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
This should work for the OP: http://www.ebay.com/itm/Control-Board-W ... 9fcl36aeKQ

Or you could head over to Jono in Atlanta (www.datasaversllc.com) and have him decrypt using PC-3000. He probably won't charge too much if there's nothing else wrong with the drive.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 4th, 2017, 4:18 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
LarrySabo wrote:
einstein9 wrote:
you don`t need it

I think he does need it, at least in North America. Perhaps you are thinking "Elements" when you read "Essentials."


seems you are right ...
i was thinking about something else. :wink:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 4th, 2017, 12:48 
Offline

Joined: July 2nd, 2017, 15:52
Posts: 2
Location: Georgia, USA
Sorry for the slow upload, the holiday is getting to me!

Attachment:
IMG_20170704_124251.jpg
IMG_20170704_124251.jpg [ 1.38 MiB | Viewed 7153 times ]



@data medics, I did call those guys and they were helpful - but unfortunately they have flat rate pricing which is still kind of high.

They did mention they thought I could use any version of the board, provided it has the same Symwave chip. Any thoughts? I've seen some Rev AB and Rev AG on Ebay/Amazon I could try

Now is the 4060-705089-001 just the USB 2.0 version of what I have?

Thanks guys


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 4th, 2017, 13:04 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
You could try imaging the drive then decrypting the image using reallymine.

_________________
Sabo Computer Repairs & Data Recovery


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 4th, 2017, 22:58 
Offline

Joined: July 3rd, 2017, 8:04
Posts: 3
Location: India
Hi, i have one of these, except it says REV ag, will it be helpful . Maybe i can ship it to you.


Top
 Profile  
 
 Post subject: Re: Looking for WD USB/SATA Bridge
PostPosted: July 5th, 2017, 3:34 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15529
Location: Australia
@khans011, if you have a multimeter, measure the Vio, Vcore and +5V test points.


Attachments:
Vcore.jpg
Vcore.jpg [ 106.41 KiB | Viewed 7087 times ]
5V_Vio.jpg
5V_Vio.jpg [ 146.92 KiB | Viewed 7087 times ]

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group