August 9th, 2017, 14:55
August 9th, 2017, 18:08
August 9th, 2017, 19:44
August 9th, 2017, 20:36
August 10th, 2017, 8:46
rogfanther wrote:Do you still have the connector part ? With that you could trace the wires to match the correct colors and pinout. Or get a CP2102 / CP2104 adapter from the usual chinese sources.
fzabkar wrote:Can you scrape away the coating to reveal the markings on the IC?
Can you puncture the coating and make contact with each of the IC's 8 pins? Needle point probes would be ideal for this purpose. We could then use a multimeter to perform continuity checks with each of the wires.
August 10th, 2017, 16:45
KarambaBread wrote:I was able to scrape away the coating with a knife, but I also scraped the IC a little bit (just the tiniest bit, it barely made a mark). Does it matter?
August 10th, 2017, 18:38
August 10th, 2017, 20:25
rogfanther wrote:That chip *could* be a PL2303SA
August 12th, 2017, 11:10
Powered by phpBB © phpBB Group.