Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Recover ST500LM012

September 2nd, 2017, 4:22

hello,
i have a ST500LM012 recognized by bios but unable to recover, disk spin and no strange /click sound from it:
( another PC shop try to recover data from windows pc when it was recognized )

at boot hangs bios for about 90/120 seconds, then is show correctly. after load ddrescue/hddsuperclone when try to recovery it hangs for long time and always show as 0 byte. Any advice before ship it to data recovery company?
thanks

Terminal output:

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.09.02 16:46:04 =~=~=~=~=~=~=~=~=~=~=~=

ActiveFW : 00
FWVer : 0001
SATA PLL cal done
DDR size detected = 8MB

DDR size detected = 8MB

*PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI Found
*PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI FoundU
S_0:23
SO_1
SPU@31'C,5039mV
IS=5
CLA ..36/75
HO..OK
HO RPM=2404 OK
AC 633
ST..OK
mS1 00000003
GT:427
SC(L):4114/29
BE.N:16
LD..OK
SK C: 7161 H:0
Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x1B
ResoTable Loaded. Rev:0x01
Bump Limit Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Fw Active 00
Ovly loaded to 0x00014D00
Ovly loaded to 0x1002DFF0
FdtTable Loaded. Rev:0x02
[GL][90PT:1A58,1F9B]
Up MC

PwrOn RRO1x @ H0
Table) cos = 431872, sin = 144640
Coeff) cos = -2209, sin = -16213

DiskSlip : 64 [SrvTrk]
DiskSlip : 63 [SrvTrk]
TgtCyl: 832
Hd: 0 Zn: 0 Avg.:- 35
TgtCyl: 267136
Hd: 0 Zn: 1 Avg.: 996

SVCAL(0080,0000)-->PASS
AP:1 C:267152->131164 H:0->0 AP Cnt: 0
SK C: 15518 H:0
ReadyTime = 11454439 us
EPOK


[DIPM_TMOUT:00000000]
ENG>mS1 00000003
SK C:162822 H:0
SC(U)..4114/151
UD..OK : 151
PK_4 C: 65 H:0

healing Enable 003C 001E 0000 001E

Re: Recover ST500LM012

September 2nd, 2017, 15:45

Could the defect list be full?

Can you show us a SMART report?
https://crystalmark.info/software/Cryst ... dex-e.html
Post a reply