hello, i have a ST500LM012 recognized by bios but unable to recover, disk spin and no strange /click sound from it: ( another PC shop try to recover data from windows pc when it was recognized )
at boot hangs bios for about 90/120 seconds, then is show correctly. after load ddrescue/hddsuperclone when try to recovery it hangs for long time and always show as 0 byte. Any advice before ship it to data recovery company? thanks
Terminal output:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2017.09.02 16:46:04 =~=~=~=~=~=~=~=~=~=~=~= ActiveFW : 00 FWVer : 0001 SATA PLL cal done DDR size detected = 8MB
DDR size detected = 8MB
*PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI Found *PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI FoundU S_0:23 SO_1 SPU@31'C,5039mV IS=5 CLA ..36/75 HO..OK HO RPM=2404 OK AC 633 ST..OK mS1 00000003 GT:427 SC(L):4114/29 BE.N:16 LD..OK SK C: 7161 H:0 Loaded FIT ( 0: 0: 1) CalibTable Loaded. Rev:0x1B ResoTable Loaded. Rev:0x01 Bump Limit Loaded. Rev:0x01 RRO1xTable Loaded. Rev:0x01 Fw Active 00 Ovly loaded to 0x00014D00 Ovly loaded to 0x1002DFF0 FdtTable Loaded. Rev:0x02 [GL][90PT:1A58,1F9B] Up MC
PwrOn RRO1x @ H0 Table) cos = 431872, sin = 144640 Coeff) cos = -2209, sin = -16213
DiskSlip : 64 [SrvTrk] DiskSlip : 63 [SrvTrk] TgtCyl: 832 Hd: 0 Zn: 0 Avg.:- 35 TgtCyl: 267136 Hd: 0 Zn: 1 Avg.: 996
SVCAL(0080,0000)-->PASS AP:1 C:267152->131164 H:0->0 AP Cnt: 0 SK C: 15518 H:0 ReadyTime = 11454439 us EPOK
[DIPM_TMOUT:00000000] ENG>mS1 00000003 SK C:162822 H:0 SC(U)..4114/151 UD..OK : 151 PK_4 C: 65 H:0 healing Enable 003C 001E 0000 001E
|