All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Toshiba MQ01ACF032 / MQ01ACF050 not initialising.
PostPosted: September 13th, 2017, 0:16 
Offline

Joined: April 16th, 2008, 4:50
Posts: 252
I have been facing a common problem with Toshiba MQ01ACFxxx series. Received quit a few drives with bad Heads / Knocking condition. After head replacement the knocking stops but drives still does not go to ready state and keeps trying to initialise(Minor Calibration sound can be heard)
has anyone faced this kind of issue with these drives. I have used heads with fully matching drives.
Any hint appreciated.


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ACF032 / MQ01ACF050 not initialising.
PostPosted: September 13th, 2017, 15:24 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 9745
Location: Australia
Would I be right in assuming that the same problem exists if you swap heads between two matching, working donors? If so, then would it be advisable to transfer the donor's head adaptives to the patient?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ACF032 / MQ01ACF050 not initialising.
PostPosted: September 20th, 2017, 15:23 
Offline

Joined: December 16th, 2015, 12:37
Posts: 75
Location: GCC
ROb wrote:
I have been facing a common problem with Toshiba MQ01ACFxxx series. Received quit a few drives with bad Heads / Knocking condition. After head replacement the knocking stops but drives still does not go to ready state and keeps trying to initialise(Minor Calibration sound can be heard)
has anyone faced this kind of issue with these drives. I have used heads with fully matching drives.
Any hint appreciated.



Hello bro ..next time try this way

Enter the utility,select the right model. wait to see drd and dsc,it may take time or some time all light is blank just give a soft rest
then go to 'edit hdd ID', the menu will appear with hdd information click ok, if not repeat this again(on/off the hdd /wait/ edit hdd ID)
refresh ID if it's id ok .. then re-enter the utility .. everything will be fine .

_________________
http://www.alwasat4pc.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: vsc and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group