All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: ST3500820AS fw SD26 updated to SD1A S.M.A.R.T. Error
PostPosted: September 18th, 2017, 1:51 
Offline

Joined: September 18th, 2017, 1:28
Posts: 4
Location: Honduras
Hello I updated my ST3500820AS that had original firmware (and have no backup of) SD26 to SD1A. Now I receive the following error message: S.M.A.R.T. Status BAD

Attachment:
File comment: S.M.A.R.T. Error
WP_20170917_23_19_23_Pro.jpg
WP_20170917_23_19_23_Pro.jpg [ 1.92 MiB | Viewed 4249 times ]


Can this error be fixed, if so please point me in the right direction?

I am not a n00b to JTAG, SPI and Serial flashing when it comes to Modems, Routers and Wireless Access Points but I have NEVER done it on a HDD before.

Attachment:
File comment: SPI Flashing my Modem
DSC01199.JPG
DSC01199.JPG [ 2.75 MiB | Viewed 4249 times ]


I have all the tools necessary including Pomona and 3M SOIC 8 and SOIC 16 Test Clips, I can read and write the flash using FlashcatUSB or a USBJTAG, I also have a UART USB adapter if serial needs to be used.

Attachment:
File comment: SPI Tools
WP_20170419_15_07_49_Pro.jpg
WP_20170419_15_07_49_Pro.jpg [ 1.76 MiB | Viewed 4249 times ]


Top
 Profile  
 
 Post subject: Re: ST3500820AS fw SD26 updated to SD1A S.M.A.R.T. Error
PostPosted: September 18th, 2017, 22:59 
Offline

Joined: September 18th, 2017, 1:28
Posts: 4
Location: Honduras
If somebody has SD26 for a ST3500820AS this may also help me to restore my drive back to normal.


Top
 Profile  
 
 Post subject: Re: ST3500820AS fw SD26 updated to SD1A S.M.A.R.T. Error
PostPosted: September 19th, 2017, 3:23 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
your drive might 'only' need clearing smart by sending cmd 'N1' on level 1.
there is plenty of info on this forum about how to connect a serial port to the drive, then you attach power to the drive (sata is not needed), open the serial port in something like hyper terminal or putty, press ctrl-z, type '/1<enter>', 'N1<enter>'
Watch it for any errors (post here if any).
Check if AltList has any entries:
'/TV4<enter>'
post the full log here.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: ST3500820AS fw SD26 updated to SD1A S.M.A.R.T. Error
PostPosted: September 19th, 2017, 9:06 
Offline

Joined: September 18th, 2017, 1:28
Posts: 4
Location: Honduras
Thank you pepe, do I have to unscrew the pcb and block the port like I have seen in certain vids?

I ask because I cant seem to find the right size torx screwdriver.


Top
 Profile  
 
 Post subject: Re: ST3500820AS fw SD26 updated to SD1A S.M.A.R.T. Error
PostPosted: September 19th, 2017, 14:26 
Offline

Joined: September 18th, 2017, 1:28
Posts: 4
Location: Honduras
Here is the serial results (drive cannot be formatted now)

Code:
F3 1>N1

F3 1>/TV4
Reassigned Sectors List
Original     New    log log   log     phy   phy
    LBA      PBA    cyl  hd  sctr zn  cyl   sctr     SFI     hours     msec
     802 3A3979F8  -----  - ----- 10 25A7E   10A                 0    1CD51 ALT     reported
     80C      82C      0  0   80C  0     0   82C   1050C4        0    1D85C     BBM reported
     815      835      0  0   815  0     0   835   1062B7        0     48BA     BBM reported
     840 3A3979F7  -----  - ----- 10 25A7E   109                 0    13FEA ALT     reported
  33694A   336AF8    16D  0   538  0   16D   538    D4A30        0    52F62     BBM reported
  5B9378   5B9568    2ED  0    A8  0   2ED    A8    E09DC        0    68085     BBM reported
  5B9379   5B9569    2ED  0    A9  0   2ED    A9    E0BD2        0    68D88     BBM reported
  5B937A   5B956A    2ED  0    AA  0   2ED    AA    E0DCC        0    69B85     BBM reported
  5B937B   5B956B    2ED  0    AB  0   2ED    AB    E0FC6        0    6A69E     BBM reported
  5B937C   5B956C    2ED  0    AC  0   2ED    AC    E11C0        0    6BFE6     BBM reported
  5B937D   5B956D    2ED  0    AD  0   2ED    AD    E13BA        0    6DC1E     BBM reported
  5B937E   5B956E    2ED  0    AE  0   2ED    AE    E15B4        0    6E927     BBM reported
  5B937F   5B956F    2ED  0    AF  0   2ED    AF    E17AE        0    6FBB8     BBM reported
  5B9380   5B9570    2ED  0    B0  0   2ED    B0    E19D5        0    706E4     BBM reported
  5B9381   5B9571    2ED  0    B1  0   2ED    B1    E1BCB        0    71513     BBM reported
  5B9382   5B9572    2ED  0    B2  0   2ED    B2    E1DC5        0    7204D     BBM reported
  5B9383   5B9573    2ED  0    B3  0   2ED    B3    E1FBF        0    72B6D     BBM reported
  5B9384   5B9574    2ED  0    B4  0   2ED    B4    E21B9        0    7369E     BBM reported
  5B9385   5B9575    2ED  0    B5  0   2ED    B5    E23B3        0    75292     BBM reported
  5B9386   5B9576    2ED  0    B6  0   2ED    B6    E25AD        0    76293     BBM reported
  5B9387   5B9577    2ED  0    B7  0   2ED    B7    E27A7        0    76DBC     BBM reported
  5B9388   5B9578    2ED  0    B8  0   2ED    B8    E29CE        0    77B02     BBM reported
  5B9389   5B9579    2ED  0    B9  0   2ED    B9    E2BC4        0    78623     BBM reported
  5B938A   5B957A    2ED  0    BA  0   2ED    BA    E2DBE        0    7991A     BBM reported
  5B938B   5B957B    2ED  0    BB  0   2ED    BB    E2FB8        0    7CCE7     BBM reported
  5B938C   5B957C    2ED  0    BC  0   2ED    BC    E31B2        0    7D821     BBM reported
  5B938D   5B957D    2ED  0    BD  0   2ED    BD    E33AC        0    7E352     BBM reported
  5B938E   5B957E    2ED  0    BE  0   2ED    BE    E35A6        0    7F685     BBM reported
  5B938F   5B957F    2ED  0    BF  0   2ED    BF    E37A0        0    812F8     BBM reported
  5B9390   5B9580    2ED  0    C0  0   2ED    C0    E39C7        0    822CC     BBM reported
Reassigned Sectors List
Original     New    log log   log     phy   phy
    LBA      PBA    cyl  hd  sctr zn  cyl   sctr     SFI     hours     msec
  5B9391   5B9581    2ED  0    C1  0   2ED    C1    E3BBD        0    82E16     BBM reported
  5B9392   5B9582    2ED  0    C2  0   2ED    C2    E3DB7        0    83C0B     BBM reported
  5B9393   5B9583    2ED  0    C3  0   2ED    C3    E3FB1        0    855B7     BBM reported
  5B9394   5B9584    2ED  0    C4  0   2ED    C4    E41AB        0    860D7     BBM reported
  5B9395   5B9585    2ED  0    C5  0   2ED    C5    E43A5        0    86ED5     BBM reported
  5B9396   5B9586    2ED  0    C6  0   2ED    C6    E459F        0    87CB9     BBM reported
  5B9397   5B9587    2ED  0    C7  0   2ED    C7    E4799        0    890CD     BBM reported

         Alt   Pending  Total    Alted  Total
       Entries Entries Entries    Alts   Alts
Head 0             23
Head 1              0
Head 2              0
Head 3              0
Total        2     23      25        0      2
Total Alt Removals:    0
Checksum = A707

F3 T>


Top
 Profile  
 
 Post subject: Re: ST3500820AS fw SD26 updated to SD1A S.M.A.R.T. Error
PostPosted: September 19th, 2017, 14:37 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4311
Location: Hungary
so it has a bunch of reassigned sectors, i would replace it as soon as possible.

_________________
Adatmentés - Data recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 69 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group