Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

i cannot find cap and rap and sap modules in rom

October 7th, 2017, 9:42

hello fzabkar and spildit :D :D

my dear friends :D :D :D

i want to cut head this rom but i cannot find modules please help me how to find rom modules address :cry: :cry: :cry:

model: st31000528as

i want to cut head 3

thanks :D :D :D
Attachments
5VP537C8.zip
(441.25 KiB) Downloaded 129 times

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 13:42

Here :

5VP537C8.rar
(446.43 KiB) Downloaded 134 times


Please do let us know if it did work out for you :)

1.jpg

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:03

Spildit wrote:Here :

5VP537C8.rar


Please do let us know if it did work out for you :)

1.jpg


thanks i will test it :D :D :D

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:21

Ok.

I did cut capacity as well.

Try it out and let us know.

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:26

Spildit wrote:Ok.

I did cut capacity as well.

Try it out and let us know.

sorry spildit not work i hear tick tick
please change back rom to 4 heads because i deleted original rom :cry: :cry: :cry:
and upload it here i'm very sorry :cry: :cry: :cry: :( :( :(

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:28

mmzhr wrote:
Spildit wrote:Ok.

I did cut capacity as well.

Try it out and let us know.
Last edited by mmzhr on October 7th, 2017, 14:29, edited 1 time in total.

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:29

mmzhr wrote:
Spildit wrote:Ok.

I did cut capacity as well.

Try it out and let us know.

sorry spildit not work i hear tick tick
please change back rom to 4 heads because i deleted original rom :cry: :cry: :cry:
and upload it here i'm very sorry :cry: :cry: :cry: :( :( :(


lolololololololololol

I did download the ROM that you posted on this thread ?!

:shock: :shock: :shock:

Try to do the same ?

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:30

Spildit wrote:
mmzhr wrote:
Spildit wrote:Ok.

I did cut capacity as well.

Try it out and let us know.

sorry spildit not work i hear tick tick
please change back rom to 4 heads because i deleted original rom :cry: :cry: :cry:
and upload it here i'm very sorry :cry: :cry: :cry: :( :( :(


lolololololololololol

I did download the ROM that you posted on this thread ?!

:shock: :shock: :shock:

Try to do the same ?


because original rom has checksum problem please fix it with sediv :cry: :cry: :cry:

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:34

You must be jocking ...

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:38

Spildit wrote:You must be jocking ...


no i say truth i f you open this rom without cut head and save it with sediv will be fixed :D :D :D
please do it just one more time :cry: :cry: :cry:
i do not want to disturb you :oops: :oops: :oops:

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:44

mmzhr wrote:
Spildit wrote:You must be jocking ...


no i say truth i f you open this rom without cut head and save it with sediv will be fixed :D :D :D
please do it just one more time :cry: :cry: :cry:
i do not want to disturb you :oops: :oops: :oops:


No it will be not !!!

I would have to click the option to re-calculate CRC.

Why do you think CRC is bad ?

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 14:49

Spildit wrote:
mmzhr wrote:
Spildit wrote:You must be jocking ...


no i say truth i f you open this rom without cut head and save it with sediv will be fixed :D :D :D
please do it just one more time :cry: :cry: :cry:
i do not want to disturb you :oops: :oops: :oops:


No it will be not !!!

I would have to click the option to re-calculate CRC.

Why do you think CRC is bad ?


because i change head number from 4 to 5 and hdd went dead but i edited rom and change value to 4 hdd working but but i dont know how calc crc
i see error 00005014

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 15:22

Ok.

I will charge $300 for thats service, ok ?

Send me paypal fund to my account and i will send you fixed ROM.

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 15:42

See ...

Analysis of Seagate F3 ROM:
http://www.hddoracle.com/viewtopic.php?f=59&t=2173

Here are the results of my checksum test:

Code:
02-WHOLE.BIN:  CRC16 = 0x0000
02-USED.BIN:  CRC16 = 0x0773
04-WHOLE.BIN:  CRC16 = 0x0000
03-WHOLE.BIN:  CRC16 = 0x0000
06-WHOLE.BIN:  CRC16 = 0x0000
0B-WHOLE.BIN:  CRC16 = 0x0000
0B-USED.BIN:  CRC16 = 0x0000
05-WHOLE.BIN:  CRC16 = 0x0000
0E-WHOLE.BIN:  CRC16 = 0xA670
02-USED2.BIN:  CRC16 = 0x4BE3

Code:
02-WHOLE BIN       398,904  10-08-17  5:54a 02-whole.bin
02-USED  BIN       395,848  10-08-17  5:54a 02-used.bin
04-WHOLE BIN           528  10-08-17  5:55a 04-whole.bin
03-WHOLE BIN        77,824  10-08-17  5:58a 03-whole.bin
06-WHOLE BIN        33,808  10-08-17  5:58a 06-whole.bin
0B-WHOLE BIN         4,352  10-08-17  6:00a 0B-whole.bin
0B-USED  BIN         4,120  10-08-17  6:01a 0B-used.bin
05-WHOLE BIN         8,216  10-08-17  6:02a 05-whole.bin
0E-WHOLE BIN           656  10-08-17  6:02a 0E-whole.bin
02-USED2 BIN       395,792  10-08-17  6:09a 02-used2.bin

The only segments that are questionable are 02 (CFW - controller firmware) and 0E (IAP - Interface Adaptive Parameters). The "whole-space" checksum for CFW is 0 but its used-space checksum is non-zero.

Note that, when calculating the checksum for segment 02, we need to include the directory (offsets 0 - 0x37). I tried cutting off the directory (02-USED2.BIN), but the used-space checksum remained non-zero. Either there is a genuine checksum error, or a misunderstanding on my part. In any case the "bad" used-space checksum appears to be benign, ie it is ignored by the drive.

The IAP segment appears to be in an uninitialised state. I suspect that its checksum would be recalculated by the drive when a particular flag (eg PUIS) is set.

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 17:01

fzabkar wrote:See ...

Analysis of Seagate F3 ROM:
http://www.hddoracle.com/viewtopic.php?f=59&t=2173

Here are the results of my checksum test:

Code:
02-WHOLE.BIN:  CRC16 = 0x0000
02-USED.BIN:  CRC16 = 0x0773
04-WHOLE.BIN:  CRC16 = 0x0000
03-WHOLE.BIN:  CRC16 = 0x0000
06-WHOLE.BIN:  CRC16 = 0x0000
0B-WHOLE.BIN:  CRC16 = 0x0000
0B-USED.BIN:  CRC16 = 0x0000
05-WHOLE.BIN:  CRC16 = 0x0000
0E-WHOLE.BIN:  CRC16 = 0xA670
02-USED2.BIN:  CRC16 = 0x4BE3

Code:
02-WHOLE BIN       398,904  10-08-17  5:54a 02-whole.bin
02-USED  BIN       395,848  10-08-17  5:54a 02-used.bin
04-WHOLE BIN           528  10-08-17  5:55a 04-whole.bin
03-WHOLE BIN        77,824  10-08-17  5:58a 03-whole.bin
06-WHOLE BIN        33,808  10-08-17  5:58a 06-whole.bin
0B-WHOLE BIN         4,352  10-08-17  6:00a 0B-whole.bin
0B-USED  BIN         4,120  10-08-17  6:01a 0B-used.bin
05-WHOLE BIN         8,216  10-08-17  6:02a 05-whole.bin
0E-WHOLE BIN           656  10-08-17  6:02a 0E-whole.bin
02-USED2 BIN       395,792  10-08-17  6:09a 02-used2.bin

The only segments that are questionable are 02 (CFW - controller firmware) and 0E (IAP - Interface Adaptive Parameters). The "whole-space" checksum for CFW is 0 but its used-space checksum is non-zero.

Note that, when calculating the checksum for segment 02, we need to include the directory (offsets 0 - 0x37). I tried cutting off the directory (02-USED2.BIN), but the used-space checksum remained non-zero. Either there is a genuine checksum error, or a misunderstanding on my part. In any case the "bad" used-space checksum appears to be benign, ie it is ignored by the drive.

The IAP segment appears to be in an uninitialised state. I suspect that its checksum would be recalculated by the drive when a particular flag (eg PUIS) is set.


but how sediv or mrt or other tools cacl checksum i must find rom calc alghoritm

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 17:05

Spildit wrote:Ok.

I will charge $300 for thats service, ok ?

Send me paypal fund to my account and i will send you fixed ROM.


$300 for damaged drive :shock: :shock: :shock:

with $300 i can buy 8tb drive :D :D :D

i will find rom cut head tool :twisted: :twisted: :twisted:

i learned new information about rom with hex compare and ida pro :twisted: :twisted: :twisted:

anyway thanks for your help :) :) :)

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 17:14

mmzhr wrote:(...)
with $300 i can buy 8tb drive :D :D :D


No you can't.

Because as you stated ....

mmzhr wrote:$ iranian people suffer hard life salary is 200 $/month



So you can't buy a $300 8TB drive.

Period.

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 17:18

It just looks like you have a big pile of junk .... er .... Seagate drives that you want to ... "fix" .... to see to the poor users that will buy them.

Just looks like you want to make "easy" money by "fixing" that Seagate junk in a way that you can sell those drives.

You asked already to cut heads on several drives + made some questions about refurb Seagate + Regen ROM on Seagate F3 because you have a huge amount of drives without native ROM / PCB ... etc .... yest you want to do all by TTL and you don't want to invest in tools and then you do stupid stuff like "patching" ROM without keeping the original. Just change the ROM that you have back to the way it was prior to your editing !

Most of what you post doesn't make sense....

Sorry to say this but i think you are just asking for people to solve your problems so that you can fix those drives to make money with them.

At least buy something like SeDiv if you want to keep doing this. Either that or disassemble F/W get a decent ATA terminal and start learning VSCs....

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 17:22

Spildit wrote:It just looks like you have a big pile of junk .... er .... Seagate drives that you want to ... "fix" .... to see to the poor users that will buy them.

Just looks like you want to make "easy" money by "fixing" that Seagate junk in a way that you can sell those drives.

You asked already to cut heads on several drives + made some questions about refurb Seagate + Regen ROM on Seagate F3 because you have a huge amount of drives without native ROM / PCB ... etc .... yest you want to do all by TTL and you don't want to invest in tools and then you do stupid stuff like "patching" ROM without keeping the original. Just change the ROM that you have back to the way it was prior to your editing !

Most of what you post doesn't make sense....

Sorry to say this but i think you are just asking for people to solve your problems so that you can fix those drives to make money with them.

At least buy something like SeDiv if you want to keep doing this. Either that or disassemble F/W get a decent ATA terminal and start learning VSCs....


no spildit i'm askking to learning secrets of hdd rom and firmware :) :) :)

youre right my english is very bad :cry: :cry: :cry:
Last edited by mmzhr on October 7th, 2017, 17:25, edited 1 time in total.

Re: i cannot find cap and rap and sap modules in rom

October 7th, 2017, 17:24

Spildit wrote:
mmzhr wrote:(...)
with $300 i can buy 8tb drive :D :D :D


No you can't.

Because as you stated ....

mmzhr wrote:$ iranian people suffer hard life salary is 200 $/month



So you can't buy a $300 8TB drive.

Period.


yes i can

https://www.itbazar.com/p_29751.aspx

see this page

its a reseller in iran that sell origianl hdds with 2 or 3 years warranty 8) 8) 8)
Post a reply