October 10th, 2017, 4:33
October 10th, 2017, 5:45
October 10th, 2017, 5:55
Dmitri wrote:A couple of important notes:
1) Please note this is an alpha-version of R.tester, hence we did not announce it yet anyhow.
But since this topic is here, here's the correct link to program description (in Russian):
https://rlab.ru/tools/rtester.html
2) Despite the alpha development stage, it works, so please feel free to use it, but don't be too surprised if there are any glitches.
Soon we will create an official description and support section for R.tester with more details about its functionality and usage.
Once we have something closer to stable release, I will surely mention that separately.
October 10th, 2017, 7:12
October 10th, 2017, 12:27
northwind wrote:Thanks, it looks extremely handy.
If you could translate the Diag settings window, I'd be grateful
October 10th, 2017, 13:29
northwind wrote:Thanks, it looks extremely handy.
If you could translate the Diag settings window, I'd be grateful
October 10th, 2017, 15:49
Spildit wrote:Why don't you contact ICCSYS and buy full SeDiv ?
No-One will send you FULL SeDiv by mail because there are no pirated SeDiv and even if there were no-one would send it to you !!!
October 10th, 2017, 16:12
Spildit wrote:It's not .....
Also the first version of SeDiv worked with ST-10 only and was published years before MRT pro ...
October 15th, 2017, 19:40
northwind wrote:Thanks, it looks extremely handy.
If you could translate the Diag settings window, I'd be grateful
Spildit wrote:they did rip HRT / HDD.exe code to create this tool ....
They are even using .ini files and decoding rules for S.M.A.R.T. / drive ID that were "stolen" from HRT / HDD.exe
October 15th, 2017, 23:59
Dmitri wrote:northwind
Sure, the initial plan was to break it in on the domestic market before the stable international release, but since there's an interest, we will prepare a detailed description and support section in English without waiting for that.
I will make a good (not automated) translation of the Diag window maybe not within the days, but within the next week or two. Have quite a lot on my plate at the
October 16th, 2017, 3:03
Spildit wrote:I do like the concept of this tool but i DON'T like the fact that they did rip HRT / HDD.exe code to create this tool ....
They are even using .ini files and decoding rules for S.M.A.R.T. / drive ID that were "stolen" from HRT / HDD.exe ....
Example :
- Code:
PIO modes supported=64 DEC 0 0xFF
Minimum multiword DMA transfer cycle time (ns) per word=65 DEC 0 0xffff
Manufacturer_s recommended multiword DMA cycle time (ns)=66 DEC 0 0xffff
Manufacturer_s PIO cycle time (ns) without flow control=67 DEC 0 0xffff
Manufacturer_s PIO cycle time (ns) with flow control=68 DEC 0 0xffff
October 16th, 2017, 6:29
Spildit wrote:I do like the concept of this tool but i DON'T like the fact that they did rip HRT / HDD.exe code to create this tool ....
They are even using .ini files and decoding rules for S.M.A.R.T. / drive ID that were "stolen" from HRT / HDD.exe ....
Example :
- Code:
PIO modes supported=64 DEC 0 0xFF
Minimum multiword DMA transfer cycle time (ns) per word=65 DEC 0 0xffff
Manufacturer_s recommended multiword DMA cycle time (ns)=66 DEC 0 0xffff
Manufacturer_s PIO cycle time (ns) without flow control=67 DEC 0 0xffff
Manufacturer_s PIO cycle time (ns) with flow control=68 DEC 0 0xffff
October 16th, 2017, 14:53
Spildit wrote:I do like the concept of this tool but i DON'T like the fact that they did rip HRT / HDD.exe code to create this tool ....
They are even using .ini files and decoding rules for S.M.A.R.T. / drive ID that were "stolen" from HRT / HDD.exe ....
Example :
- Code:
PIO modes supported=64 DEC 0 0xFF
Minimum multiword DMA transfer cycle time (ns) per word=65 DEC 0 0xffff
Manufacturer_s recommended multiword DMA cycle time (ns)=66 DEC 0 0xffff
Manufacturer_s PIO cycle time (ns) without flow control=67 DEC 0 0xffff
Manufacturer_s PIO cycle time (ns) with flow control=68 DEC 0 0xffff
October 17th, 2017, 4:41
October 17th, 2017, 7:37
northwind wrote:Thanks, it looks extremely handy.
If you could translate the Diag settings window, I'd be grateful
October 17th, 2017, 7:49
hwdiver wrote:northwind wrote:Thanks, it looks extremely handy.
If you could translate the Diag settings window, I'd be grateful
The easiest way to get everything in English - use "OLD Setup" menu and then:
- disable LUA Scripting
- change Profile Library selection to "Default"
All original dialogs and messages are written on English by default.
October 17th, 2017, 14:52
Really?Spildit wrote:It doesn't have anything to do with knowing the history of HDD.EXE Team or even BVG
then how did you decide so clearly who is the original and who is the thief?Spildit wrote:just compared the way R.Tester decodes S.M.A.R.T. and drive ID (passport) and the way the decoding rules work are exactly the same HDD.EXE / HRT uses
October 17th, 2017, 19:04
October 18th, 2017, 1:43
Spildit wrote:The latest "full" version of HDD.EXE that i have is 6.0 (there are at least 7.0 but i don't have that). But even on earlier versions like 5.0 if one attempts to use defectoscope one will get this :
....
So it was planned from start that HDD.EXE would turn HRT and would have license system :
....
So why should i assume that rlab Mikhail Mavritsin was "part" of HDD.EXE team when the about section of HDD.EXE doesn't have any "hint" in that direction ?
...
October 18th, 2017, 1:54
Spildit wrote:The latest "full" version of HDD.EXE that i have is 6.0 (there are at least 7.0 but i don't have that). But even on earlier versions like 5.0 if one attempts to use defectoscope one will get this :
...
Powered by phpBB © phpBB Group.