Any way to connect TEAC SD-3250N to PC with USB adapter?

[necros]

Where to buy?)

[jerovsek]

http://www.ebay.com/itm/TEAC-SD-3250N-3 ... 2440804534
or check ebay

you can try with http://www.ebay.com/bhp/ide-to-sata-converter ide to sata

http://www.ebay.com/bhp/ide-to-usb ide to usb

[necros]

i can`t cause it`s specific connector, will post pic later

[fzabkar]

It appears that the drive in jerovsek's eBay link comes with a 40-pin IDE interface adapter. I don't know if they ship extraterrestially, though.

[rogfanther]

Well, if the drive was scavenged from a broken Mars Rover, maybe he should call NASA and see if they have a spare ?

[jerovsek]

http://www.mhill.co.kr/shop/shopdetail. ... uid=416064

[necros]

this is the connector i have on this hdd

Attachments

[fzabkar]

Mon Oct 16, 2017 9:38 pm:

i can`t cause it`s specific connector, will post pic later

Sun Mar 25, 2018 5:23 pm:

this is the connector i have on this hdd

That took 5 months. Did you bring it back to Earth with you?

Seriously, you should try to purchase the adapter alluded to earlier.

http://www.acelab.ru/dep.pc/doc.pc3000dos/050530.001/PCTEAC.pdf

[fzabkar]

Some photos ...

http://www.rom.by/comment/260189

[Samir]

http://www.mhill.co.kr/shop/shopdetail.html?branduid=416064

This is clearly the adapter you need. It is also commonly used for cd/dvd drives so you can probably use an adapter designed for those drives as well, which may be more common on ebay, et al.

From that point, all you need is an IDE to USB adapter cable or IDE USB external enclosure for the drive.