All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: ST3500312CS With SC13 Not detected
PostPosted: September 30th, 2018, 7:13 
Offline

Joined: January 18th, 2010, 23:53
Posts: 335
Location: india
HDD with model ST3500312CS with FW. SC13.

When connected with terminal Shows only

Rst 0x08M

Then nothing but hdd is spinning without clicks.

Changed PCB and transferred ROM then also Same result.

What is the problem?


Top
 Profile  
 
 Post subject: Re: ST3500312CS With SC13 Not detected
PostPosted: September 30th, 2018, 7:55 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
Sounds like a firmware problem.

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se


Top
 Profile  
 
 Post subject: Re: ST3500312CS With SC13 Not detected
PostPosted: September 30th, 2018, 10:30 
Offline

Joined: January 8th, 2008, 5:21
Posts: 925
Location: uk
Did you try sending? Ctrl Z


Top
 Profile  
 
 Post subject: Re: ST3500312CS With SC13 Not detected
PostPosted: September 30th, 2018, 11:35 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan
likely firmware problem as mentioned by spokk

_________________
Data Recovery Pakistan


Top
 Profile  
 
 Post subject: Re: ST3500312CS With SC13 Not detected
PostPosted: September 30th, 2018, 14:17 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
Can you give more information?
What utility do you use ?, do you have access to the SA? etc.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: ST3500312CS With SC13 Not detected
PostPosted: October 1st, 2018, 4:31 
Offline

Joined: January 18th, 2010, 23:53
Posts: 335
Location: india
Problem Solved.

By Blocking Motor Got T Prompt. Tried to clear Smart but got LED: CD error

Then tried with

1. Arrived T Prompt
2. Checked V4 and V40 Nothing
3. Tried with m0,6,3,,,,,22 but got Diag error 500D
4. Applied m0,2,1,,,,,22 then m0,2,2,,,,,22
5. Cleared SMART
6. Data Ready


Top
 Profile  
 
 Post subject: Re: ST3500312CS With SC13 Not detected
PostPosted: October 1st, 2018, 5:42 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
Congratulations and thank you for sharing the solution.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: DeVlL, Google [Bot] and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group