View topic - ST380815AS

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST380815AS

Page 1 of 1

[ 5 posts ]

Previous topic | Next topic

Author

Message

unknown

Post subject: ST380815AS

Posted: January 2nd, 2018, 8:52

Joined: October 21st, 2007, 8:48
Posts: 1631

Hello
The drive in topic is always busy.
I can read sectors by terminal, but very very slow.
Is there any suggestions?
Thanks in advance.
Terminal output:
4096k x 16 DRAM
NHAWK - 1_Disk S-41 10-23-06_16:40
HM SFI
!
(P)SATA Reset
Failed sys sect. write! Nwt Er 33 RdWr 137dc.00.0003

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 137dc.00.0003
Unable To Load Overlay 01|000A

T>

Top

unknown

Post subject: Re: ST380815AS

Posted: January 2nd, 2018, 16:27

Joined: October 21st, 2007, 8:48
Posts: 1631

Spildit wrote:

ATA overlay is damaged so you can't access the drive by ATA.

APP code is ok as you have level T and not F. Adaptives and Defect lists should be ok.

Try to boot from loader. Maybe you can extract the data if you load the drive by a loader with correct FW version. This should load ATA overlay on RAM.

Also if you have FW for your drive you can try to replace ATA overlay as long as you use correct one.

Or you can try to read ATA overlay from your drive and see if you are lucky ...

Thanks for the input.
I will try with matched loader.
thank you

Top

Tomset

Post subject: Re: ST380815AS

Posted: January 2nd, 2018, 16:44

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow

Er 33 RdWr - not load adаptive UA

Top

unknown

Post subject: Re: ST380815AS

Posted: January 3rd, 2018, 8:11

Joined: October 21st, 2007, 8:48
Posts: 1631

Spildit wrote:

Tomset wrote:

Er 33 RdWr - not load adаptive UA

Interesting.

Can you try R2 at T> ?

Failed sys sect. write! Nwt Er 33 RdWr 137dc.00.0003

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 137dc.00.0003
Unable To Load Overlay 01|000A

T>R2
Code - 74 Track FFFFF(137DC).0.012 Sns FFF Rty 027F.FF.80FF Rtf 1800 LBA 000005E5
T>

Top

unknown

Post subject: Re: ST380815AS

Posted: January 3rd, 2018, 8:21

Joined: October 21st, 2007, 8:48
Posts: 1631

Case solved by transferring by terminal.

Data needed was some XLS's

Thank you very much. :good:

Top

Page 1 of 1

[ 5 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum