All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: ST1000LM035
PostPosted: January 7th, 2018, 9:25 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1181
Hello
The drive in topic is getting ready. I can read sectors after power reset but every 2-3 seconds must reset power to continue reading sectors.

Terminal output:
Boot 0x80M
Rst 0x80MSrv DETCR init 0x0000
(P) SATA Reset

RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
(POR) Recover Secondary MCMT Opened Recovered
(MC POR Duration): 000000018A
Send Status: COMRESET seen
CSpd= 6Gbps
DSC
PrgFOut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
SPRegen [0000|03110488] @LBA=0x0DB01F4COut:
SP Regen FAIL
For endless loop

P-List?
Is there any suggestions?
Thanks in advance


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group