Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 11th, 2018, 21:26
Hi!
Western Digital have ttl port? and how configurate RX,TX and Ground? 1292 IDE
a TTL adaptor to WD drives in order to use x-modem to write back the ROM to the PCB in case of damaged ROM.
For each pcb you short special points and with TTL connected and software running you upload ROM back to PCB???
short special points and with connected and PCB.??1292 IDE
1335
Hello everyone, sorry for my english, because am using google translator.
January 12th, 2018, 19:27
Spildit, Can you post a picture of the PCB ? Yeah
What "software" are you using ? U-Command ? MRT PRO ?Yeah U-Command
-------------------------------------------------------
1292
https://imgur.com/pejdHrOhttps://imgur.com/yoiEUpE------------------------------
1335
https://imgur.com/JNJaWhyhttps://imgur.com/jm15jeH----------------------------
https://imgur.com/lqpHHqxhttps://imgur.com/HY4JxvF1444
------------------------
and with TTL connected
https://imgur.com/ISOyOVfhttps://imgur.com/aDvxFNtThank you for replying
January 13th, 2018, 14:07
Thank you for replying
Powered by phpBB © phpBB Group.