All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 7:26 
Offline
User avatar

Joined: October 30th, 2007, 17:58
Posts: 463
Location: Egypt
@ Unknown , You are more than welcome any time Dear :horse:
:druunk:

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 9:24 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Tawfeek, Thank you my friend.
100% data recovered. (60 GB) :wink:


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 11:17 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3561
Location: Chicago
unknown wrote:
@ Doomer
Unfortunately, I will continue doing data recovery. :mrgreen:

Yes, that's unfortunate

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 11:18 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3561
Location: Chicago
unknown wrote:
100% data recovered. (60 GB) :wink:

I doubt that very much, considering that all latest data that was in MC was wiped clean once you racalced translator

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 11:30 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Doomer wrote:
unknown wrote:
100% data recovered. (60 GB) :wink:

I doubt that very much, considering that all latest data that was in MC was wiped clean once you racalced translator

Why should I lie?
What proof do you need?
I don't know why are you so offensive to me and like you take it personally?


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 11:38 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3561
Location: Chicago
unknown wrote:
Why should I lie?

you don't lie
you simple don't understand and as I said before, that's is unfortunate, for your clients of course.

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 11:41 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Discussion ends here. As the case is solved already.
Thanks for anyone tried to help.
Good luck.


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 13:27 
Offline
User avatar

Joined: October 30th, 2007, 17:58
Posts: 463
Location: Egypt
unknown wrote:
Tawfeek, Thank you my friend.
100% data recovered. (60 GB) :wink:


i like this part . :smokers:

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 17:05 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4314
Location: Hungary
copying 100% of the files does not mean they contain the data they should. This is the bad thing with clearing MC. It should be avoided where possible.

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 1st, 2018, 17:23 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
pepe wrote:
copying 100% of the files does not mean they contain the data they should. This is the bad thing with clearing MC. It should be avoided where possible.

~60 GB of Pics and Videos are tested and working.
But you are totally right. This time I was lucky enough to get the data.
Next time I will think several thousands times before messing with rosewood with my limited tools and knowledge.


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 4th, 2019, 12:55 
Offline

Joined: March 30th, 2016, 5:03
Posts: 8
Location: Dhaka-1205 Bangladesh
i can solve this problem


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 4th, 2019, 13:06 
Offline

Joined: March 30th, 2016, 5:03
Posts: 8
Location: Dhaka-1205 Bangladesh
unknown wrote:
Hello
ST1000LM035
SBM3
1 TB
The drive in topic shows correct ID, capacity and FW then stuck in busy and no user area access.
Terminal output:
Boot 0x80M
QB
Rst 0x80MSrv DETCR init 0x0000
(P) SATA Reset

RAW OFF
PASS
(DOS Table) Worst Count: 000015F4 At SU: 00004888 NT: 0000000A OT: 0000000E
(POR) Recover Secondary MCMT Opened Recovered
(MC POR Duration): 0000000146
Send Status: COMRESET seen
CSpd= 6Gbps
Update Mask - 0000000006196520 - 00000008 - 00
Update Mask - 0000000006196528 - 00000008 - 00
Update Mask - 0000000006196530 - 00000008 - 00
Update Mask - 0000000006196538 - 00000008 - 00
Update Mask - 0000000006196540 - 00000008 - 00
Update Mask - 0000000006196548 - 00000008 - 00
Update Mask - 0000000006196550 - 00000008 - 00
Update Mask - 0000000006196558 - 00000008 - 00
Update Mask - 0000000006196560 - 00000008 - 00
Update Mask - 0000000006196568 - 00000008 - 00
Update Mask - 0000000006196570 - 00000008 - 00
Update Mask - 0000000006196670 - 00000008 - 00
Update Mask - 0000000006196678 - 00000008 - 00
Update Mask - 0000000006196680 - 00000008 - 00
Update Mask - 0000000006196688 - 00000008 - 00
Update Mask - 0000000006196690 - 00000008 - 00
Update Mask - 0000000006196698 - 00000008 - 00
Update Mask - 00000000061966A0 - 00000008 - 00
Update Mask - 00000000061966A8 - 00000008 - 00
Update Mask - 00000000061966B0 - 00000008 - 00
Update Mask - 00000000061966B8 - 00000008 - 00
Update Mask - 00000000061966C0 - 00000008 - 00
Update Mask - 00000000061966C8 - 00000008 - 00
Update Mask - 00000000061966D0 - 00000008 - 00
Update Mask - 00000000061966D8 - 00000008 - 00
Update Mask - 00000000061966E0 - 00000008 - 00
Update Mask - 00000000061966E8 - 00000008 - 00
Update Mask - 00000000061966F0 - 00000008 - 00
Update Mask - 00000000061966F8 - 00000008 - 00
Update Mask - 0000000006196700 - 00000008 - 00
Update Mask - 0000000006196708 - 00000008 - 00
Update Mask - 0000000006196710 - 00000008 - 00
Update Mask - 0000000006196718 - 00000008 - 00
Update Mask - 0000000006196720 - 00000008 - 00
Update Mask - 0000000006196728 - 00000008 - 00
Update Mask - 0000000006196730 - 00000008 - 00
Update Mask - 0000000006196738 - 00000008 - 00
Update Mask - 0000000006196740 - 00000008 - 00
Update Mask - 0000000006196748 - 00000008 - 00
Update Mask - 0000000006196750 - 00000008 - 00
Update Mask - 0000000006196758 - 00000008 - 00
Update Mask - 0000000006196760 - 00000008 - 00
Update Mask - 0000000006196768 - 00000008 - 00
Update Mask - 0000000006196770 - 00000008 - 00
Update Mask - 0000000006196778 - 00000008 - 00
Update Mask - 0000000006196780 - 00000008 - 00
Update Mask - 0000000006196788 - 00000008 - 00
Update Mask - 0000000006196790 - 00000008 - 00
Update Mask - 0000000006196798 - 00000008 - 00
Update Mask - 00000000061967A0 - 00000008 - 00
Update Mask - 00000000061967A8 - 00000008 - 00
Update Mask - 00000000061967B0 - 00000008 - 00
Update Mask - 00000000061967B8 - 00000008 - 00
Update Mask - 00000000061967C0 - 00000008 - 00
Update Mask - 00000000061967C8 - 00000008 - 00
Update Mask - 00000000061967D0 - 00000008 - 00
Update Mask - 00000000061967D8 - 00000008 - 00
Update Mask - 00000000061967E0 - 00000008 - 00
Update Mask - 00000000061967E8 - 00000008 - 00
Update Mask - 00000000061967F0 - 00000008 - 00
Update Mask - 00000000061967F8 - 00000008 - 00
Update Mask - 0000000006196800 - 00000008 - 00
Update Mask - 0000000006196808 - 00000008 - 00
Update Mask - 0000000006196810 - 00000008 - 00
Update Mask - 0000000006196818 - 00000008 - 00
Update Mask - 0000000006196820 - 00000008 - 00
Update Mask - 0000000006196828 - 00000008 - 00
Update Mask - 0000000006196830 - 00000008 - 00
Update Mask - 0000000006196838 - 00000008 - 00
Update Mask - 0000000006196840 - 00000008 - 00
Update Mask - 0000000006196848 - 00000008 - 00
Update Mask - 0000000006196850 - 00000008 - 00
Update Mask - 0000000006196858 - 00000008 - 00
Update Mask - 0000000006196860 - 00000008 - 00
Update Mask - 0000000006196868 - 00000008 - 00
Update Mask - 0000000006196870 - 00000008 - 00
Update Mask - 0000000006196878 - 00000008 - 00
Update Mask - 0000000006196880 - 00000008 - 00
Update Mask - 0000000006196888 - 00000008 - 00
Update Mask - 0000000006196890 - 00000008 - 00
Update Mask - 0000000006196898 - 00000008 - 00
Update Mask - 00000000061968A0 - 00000008 - 00
Update Mask - 00000000061968A8 - 00000008 - 00
Update Mask - 00000000061968B0 - 00000008 - 00
Update Mask - 00000000061968B8 - 00000008 - 00
Update Mask - 00000000061968C0 - 00000008 - 00
Update Mask - 0000000006196BE8 - 00000008 - 00ProcessRC: 00000000,00000000ReadContinuous: 00C32D7E,00000258TotalEntries:0000 XfrLen:0258UnrecovSectorCount:0000,0000NumUDEs: 00000000,00000000Failed: 40000087Out:
SP Regen FAIL
SPRegen [0000|43110081] @LBA=0x00C32D7EOut:
SP Regen FAIL
SPRegen [0000|43110081] @LBA=0x00C32D7EOut:

Any suggestions?
Thanks in advance for any help.



this is very easy to fix now


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 5th, 2019, 3:45 
Offline

Joined: February 2nd, 2019, 1:21
Posts: 192
Location: Sri Lanka
i think firmware are damaged in platter or heads not reading properly


Top
 Profile  
 
 Post subject: Re: RoseWood
PostPosted: March 5th, 2019, 21:38 
Offline

Joined: November 22nd, 2017, 21:47
Posts: 309
Location: France
@sopon3720@gmail.com, @Dananjaya
Didn't you notice that this thread was just one year old ? :roll:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 34 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 72 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group