All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: WD800BB PCB swap to recover data
PostPosted: April 20th, 2018, 4:22 
Offline

Joined: April 20th, 2018, 4:15
Posts: 2
Location: poland
Hi all

i have broken pcb on my hdd
is Western Digital WD800
MDL: WD800BB-22JHCO
DCM: HSBHNTJAH
PCB board is: 2060-701292-000 rev a ( white sticker: 2061-701292-00 AP)

i found donor:
MDL: WD800BB-22JHCO
DCM: HSBHCTJCH
PCB board is: 2060-701292-000 rev a ( white sticker: 2061-701292-00 AP)

is just diffrent DCM. model, pcb same.

when i change u12 (bios) it will work to recover data?

best regards


Top
 Profile  
 
 Post subject: Re: WD800BB PCB swap to recover data
PostPosted: April 20th, 2018, 4:54 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Should work


Top
 Profile  
 
 Post subject: Re: WD800BB PCB swap to recover data
PostPosted: April 20th, 2018, 5:01 
Offline

Joined: April 20th, 2018, 4:15
Posts: 2
Location: poland
Thanks

If i`ll find same hdd ( same model, same dcm, same pcb) i still need to swap u12 rom from my broken drive to donor pcb?


Top
 Profile  
 
 Post subject: Re: WD800BB PCB swap to recover data
PostPosted: April 20th, 2018, 7:47 
Offline
User avatar

Joined: January 29th, 2009, 11:23
Posts: 248
Location: SXSW
eitha wrote:
Thanks

If i`ll find same hdd ( same model, same dcm, same pcb) i still need to swap u12 rom from my broken drive to donor pcb?



Yes, you do


Top
 Profile  
 
 Post subject: Re: WD800BB PCB swap to recover data
PostPosted: April 20th, 2018, 9:14 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1387
Location: isreal
eitha wrote:
Thanks

If i`ll find same hdd ( same model, same dcm, same pcb) i still need to swap u12 rom from my broken drive to donor pcb?

some times you can get lucky, and you'll not have to transfer the U12


Top
 Profile  
 
 Post subject: Re: WD800BB PCB swap to recover data
PostPosted: April 20th, 2018, 14:46 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
jermy wrote:
eitha wrote:
Thanks

If i`ll find same hdd ( same model, same dcm, same pcb) i still need to swap u12 rom from my broken drive to donor pcb?

some times you can get lucky, and you'll not have to transfer the U12


This is true, especially if the DOM is close.

If if clicks with new PCB then you have other issues.

If it spins up and stays spinning but with no ID then you’ll need to switch U12 and it should work.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: WD800BB PCB swap to recover data
PostPosted: May 30th, 2018, 14:48 
Offline

Joined: May 30th, 2018, 14:28
Posts: 1
Location: Poland
Hi,

That's my first post so hi everyone :D

I have the same problem so I won't create a new topic.

Patient:
WD Caviar SE WD800
MDL: WD800JB-00JJA0
DCM: HSBHYTJAH
PCB 2060-001292-000 white sticker: 2061-001292-A00 AD
Not running, not visible in BIOS

Donor:
WD Caviar SE WD800
MDL: WD800JB-00JJC0
DCM: HSBHNTJCA
PCB 2060-701292-002 white sticker: 2061-701292-A00 BB
HDD is fine.

When I swap the PCB patient starts running but stops after a few seconds. Should I change U12 or PCBs are not compatibile?

Thanks for your help in advance.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 75 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group