Hi everybody
My wd hdd take wrong firmware (Rom and Tracks)and become busy
and no response when I do power reset to save new firmware
How Can I Repair it
notice: I have Full Firmware Very close to him
Thanks

its not gonna help you

What is the complete model of the hdd ?

What where you trying to do ? With which tools, and what did you do that put the hdd in this state ?

Do you have backup of the original "rom and tracks" of your hdd made before whatever it is that you did to it ?

The complete model
MDL : WD1200BB-00DWA0 Caviar
DATE : 17 JAN 2004
S/N : WMAEH2214541
DCM : HSBACVJAH
Family: Trailblazer
I was try repair it with WDR program when its firmware damage from itself
I have backup but 80% from its original modules was bad

The Data very important to me
what can i do
I know some people have pc3000 and salvationdata
but they are not know how repair busy first
Thanks for all
help me

Do you have a list of the fw modules that you were able to save?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Yes I have
This is The list of the fw modules full as wdr backup
bad and good modules in this RAR File
This is the initial problem state of the drive as you see in The modules
The first state I found my hard drive on it

As stated, there is a big chance WDr couldn´t backup correctly the modules, so that would be why they are stated as corrupud.

It would be important to know how was the drive behaving prior any manipulation.

If you need the data, now you have to send it to a data recovery professional.